Date   

Re: No Politics

Jim Patillo
 

Thanks for doing that Sam. You might want to add Superfluous BS as well. This site is suppose to be about building Quickies and only Quickies a rule we agreed to along time ago. 

Jim
N46JP Q200
1820 hours. 

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Sam Hoskins <sam.hoskins@...>
Sent: Tuesday, December 7, 2021 7:56:59 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: [Special] [Q-List] No Politics
 
And that means NO POLITICS.

Sam


politics

Chris Walterson
 

NO POLITICS----------------  Thanks Sam.    See you Saturday.--------------  Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Fuel pump & condition inspection

Frankenbird Vern
 

 Ha! That one is good!.. Eugen can sure enough tell them he is using a lawnmower engine (although one heck of a powerful Briggs!!).  Mower blade.. a BIG one!  It is air cooled after all. :-)

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Keith Welsh <kw544@...>
Sent: Monday, December 6, 2021 7:58 PM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
 
Don't have to stretch with the Onan.  It really is a lawn mower, welder, generator engine.  I've even had admirers say the prop looks like a lawn mower blade....
Not sure they were admiring though.....jealously I think?


---------- Original Message ----------
From: "Jay Scheevel" <jay@...>
To: <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
Date: Mon, 6 Dec 2021 17:45:51 -0700

I have an aversion to fibs even if is for a good cause, so I have come up with the following description: “A custom off-road recreational-vehicle”  That pretty much keeps everyone happy.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Corbin via groups.io
Sent: Monday, December 6, 2021 4:56 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Fuel pump & condition inspection

 

My favorite is, “it’s for my dad’s tractor”.  I even have a photo I show IF they get skeptical.

Corbin



On Dec 6, 2021, at 5:21 PM, smeshno1@... wrote:

 

 Eugen and any others.. BE SURE not to mention in any order or communication to them that the item is for airplane use.  Wink Wink.. Your working on a dune buggy or kit car... homebuilders on another blog had it happen...lawyers already got to the racing parts folks.  I guess NASCAR isn't dangerous or risky, but we are!!     


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Anthony P <solarant@...>
Sent: Monday, December 6, 2021 8:30 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection

 

I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL


--

Corbin 
N121CG

 



No Politics

Sam Hoskins
 

And that means NO POLITICS.

Sam


Re: Fuel pump & condition inspection

Frankenbird Vern
 

 I'm thinking of saying the intended use is for decorative mailboxes. Then they can argue with Mr. Postman
 
 We've  de-volved into a society that is hell bent to "protect" us from every possible contingency, Including 
as Charlie correctly brought up at FOD this year, not the most intelligent "solution" dealing with
micro-bugs in the mask. 

 You guys know that Oklahoma is going to battle against D.C.  We invite all sensible folks to participate
in doing the same in their home States because unless we act to stop this garbage, the insanity will only 
expand.  We have at least a zillion examples of how "just this time" or "it's only temporary"
or "once this crisis is over" since I was born in 1957 became oppression and deleted rights. 

 TSA is a perfect example. Hell they have legal rights to peek up your drawers now!!   
  
 Fact is this.. on a long enough timeline EVERYONE has a zero chance of physical survival in this life. Each
 and every one of us are someday Going West. 

 I personally feel that aviation is (at this time anyway) less dangerous than being a convenience store clerk,
 but I don't see the lawyers at the store front door lined up to get the government to "protect" these
 souls that get paid rather poorly for the risk they assume.  

 Really glad to be back in The Sooner State..even more so I made the choice to move here from an overbearing
 liberal controlled location in 2016.  The best decision I have made up to now.    

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Monday, December 6, 2021 11:37 PM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
 

I guess you could tell them you are an artist and are making “kinetic sculpture” for your non-profit museum.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Anthony P
Sent: Monday, December 6, 2021 8:56 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Fuel pump & condition inspection

 

I had a local machine shop refuse to make some very simple parts for me as soon as I said they were for a race car.
Also, I'm having some parts delayed from Revmaster because their current supplier found out the parts were going on aircraft.

What's the world coming to?

--
Q2 N86KL


Re: Fuel pump & condition inspection

Brian Larick
 

Jay,  love that project.  Perfect for all applications.

Brian

On Dec 7, 2021, at 10:07, Sam Hoskins <sam.hoskins@...> wrote:


The pump is a Walbro GSL393.  https://www.amazon.com/dp/B00557SBEU?ref_=pe_623860_70668520_dpLink
The 10 micron filter is Summit Racing SUM-230117 https://www.summitracing.com/parts/sum-230117

This pump is for automotive style fuel injection only. Absolutely not to be used with the gravity fed carburetors.

Sam

On Sun, Dec 5, 2021 at 2:37 PM Eugen Pilarski <interbus@...> wrote:
Sam, did you have a part# from your pump and the filter?

Best regards

Eugen 

Am 04.12.2021 um 22:11 schrieb Michael <dunningme@...>:

Sam,

What's this thing? Fuel flow?
<1~2.jpg>
--
-MD
#2827 (still thinking about planning on visualizing how to finish building)


Re: Fuel pump & condition inspection

Sam Hoskins
 

The pump is a Walbro GSL393.  https://www.amazon.com/dp/B00557SBEU?ref_=pe_623860_70668520_dpLink
The 10 micron filter is Summit Racing SUM-230117 https://www.summitracing.com/parts/sum-230117

This pump is for automotive style fuel injection only. Absolutely not to be used with the gravity fed carburetors.

Sam

On Sun, Dec 5, 2021 at 2:37 PM Eugen Pilarski <interbus@...> wrote:
Sam, did you have a part# from your pump and the filter?

Best regards

Eugen 

Am 04.12.2021 um 22:11 schrieb Michael <dunningme@...>:

Sam,

What's this thing? Fuel flow?
<1~2.jpg>
--
-MD
#2827 (still thinking about planning on visualizing how to finish building)


Re: Fuel pump & condition inspection

Jay Scheevel
 

I guess you could tell them you are an artist and are making “kinetic sculpture” for your non-profit museum.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Anthony P
Sent: Monday, December 6, 2021 8:56 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Fuel pump & condition inspection

 

I had a local machine shop refuse to make some very simple parts for me as soon as I said they were for a race car.
Also, I'm having some parts delayed from Revmaster because their current supplier found out the parts were going on aircraft.

What's the world coming to?

--
Q2 N86KL


Re: Fuel pump & condition inspection

Anthony P
 

I had a local machine shop refuse to make some very simple parts for me as soon as I said they were for a race car.
Also, I'm having some parts delayed from Revmaster because their current supplier found out the parts were going on aircraft.

What's the world coming to?

--
Q2 N86KL


Re: Fuel pump & condition inspection

 

Don't have to stretch with the Onan.  It really is a lawn mower, welder, generator engine.  I've even had admirers say the prop looks like a lawn mower blade....
Not sure they were admiring though.....jealously I think?


---------- Original Message ----------
From: "Jay Scheevel" <jay@...>
To: <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
Date: Mon, 6 Dec 2021 17:45:51 -0700

I have an aversion to fibs even if is for a good cause, so I have come up with the following description: “A custom off-road recreational-vehicle”  That pretty much keeps everyone happy.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Corbin via groups.io
Sent: Monday, December 6, 2021 4:56 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Fuel pump & condition inspection

 

My favorite is, “it’s for my dad’s tractor”.  I even have a photo I show IF they get skeptical.

Corbin



On Dec 6, 2021, at 5:21 PM, smeshno1@... wrote:

 

 Eugen and any others.. BE SURE not to mention in any order or communication to them that the item is for airplane use.  Wink Wink.. Your working on a dune buggy or kit car... homebuilders on another blog had it happen...lawyers already got to the racing parts folks.  I guess NASCAR isn't dangerous or risky, but we are!!     


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Anthony P <solarant@...>
Sent: Monday, December 6, 2021 8:30 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection

 

I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL


--

Corbin 
N121CG

 



Re: Fuel pump & condition inspection

Jay Scheevel
 

I have an aversion to fibs even if is for a good cause, so I have come up with the following description: “A custom off-road recreational-vehicle”  That pretty much keeps everyone happy.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Corbin via groups.io
Sent: Monday, December 6, 2021 4:56 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Fuel pump & condition inspection

 

My favorite is, “it’s for my dad’s tractor”.  I even have a photo I show IF they get skeptical.

Corbin



On Dec 6, 2021, at 5:21 PM, smeshno1@... wrote:



 Eugen and any others.. BE SURE not to mention in any order or communication to them that the item is for airplane use.  Wink Wink.. Your working on a dune buggy or kit car... homebuilders on another blog had it happen...lawyers already got to the racing parts folks.  I guess NASCAR isn't dangerous or risky, but we are!!     


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Anthony P <solarant@...>
Sent: Monday, December 6, 2021 8:30 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection

 

I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL


--

Corbin 
N121CG


Re: Fuel pump & condition inspection

Corbin <c_geiser@...>
 

My favorite is, “it’s for my dad’s tractor”.  I even have a photo I show IF they get skeptical.

Corbin

On Dec 6, 2021, at 5:21 PM, smeshno1@... wrote:


 Eugen and any others.. BE SURE not to mention in any order or communication to them that the item is for airplane use.  Wink Wink.. Your working on a dune buggy or kit car... homebuilders on another blog had it happen...lawyers already got to the racing parts folks.  I guess NASCAR isn't dangerous or risky, but we are!!     

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Anthony P <solarant@...>
Sent: Monday, December 6, 2021 8:30 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
 
I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL

--

Corbin 
N121CG


Re: Fuel pump & condition inspection

Frankenbird Vern
 

 Eugen and any others.. BE SURE not to mention in any order or communication to them that the item is for airplane use.  Wink Wink.. Your working on a dune buggy or kit car... homebuilders on another blog had it happen...lawyers already got to the racing parts folks.  I guess NASCAR isn't dangerous or risky, but we are!!     

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Anthony P <solarant@...>
Sent: Monday, December 6, 2021 8:30 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Fuel pump & condition inspection
 
I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL


Re: Fuel pump & condition inspection

Anthony P
 

I believe Eugen was asking about these, "two Walbro pumps and the 10 micron fuel filter from Summit Racing".

They can easily be found on the Summit Racing website.


--
Q2 N86KL


Re: Fuel pump & condition inspection

Richard Thomson
 

Its a Gascolator.

On 04/12/2021 21:11, Michael wrote:

Sam,

What's this thing? Fuel flow?

--
-MD
#2827 (still thinking about planning on visualizing how to finish building)


Re: Q-List Zoom meeting - Ask the Pilots - Saturday 11 December

Paul Poulsen
 

All good Sam, it was just a thought. I will try and make it :)
All the best
Paul

On Monday, 6 December 2021, 06:57:17 am AEST, Paul Poulsen via groups.io <paul.poulsen1957@...> wrote:


Hi Sam,
Thanks for organising this, it will be a great benefit to those of us stuck in the holding pattern of building/restoring.
As it will be 01.00 here, I am not sure if it is possible to record meetings in Zoom, but if it is would it be possible to record the meeting and place or post a link? I am thinking of the long term gain as a referencing as well as being selfish and not missing out :)
Just a though.
Clear skies and tailwinds
Paul

On Sunday, 5 December 2021, 01:13:25 am AEST, Sam Hoskins <sam.hoskins@...> wrote:


This month, instead of a Q-Tour, let's have an Ask the Pilots Q&A session.  This is a chance for newbies, builders and wanabes to ask the guys who are actually flying those burning questions you have. This session will most likely NOT be uploaded to YouTube.

As always, don't log in until 9:00.

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Q-List Zoom - Ask the Pilots
Time: Dec 11, 2021 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/74145876920?pwd=T0tlRmJIdGFncHJKTUJqNWt4eU5pQT09
 
Meeting ID: 741 4587 6920
Passcode: 83y89J
 


Re: Q-List Zoom meeting - Ask the Pilots - Saturday 11 December

Sam Hoskins
 

Paul Poullson. Sorry, I don't think I'm going to do it. There is more to it than just posting a link and I'm not really planning on archiving chats.

Sam

On Sun, Dec 5, 2021 at 2:57 PM Paul Poulsen <paul.poulsen1957@...> wrote:
Hi Sam,
Thanks for organising this, it will be a great benefit to those of us stuck in the holding pattern of building/restoring.
As it will be 01.00 here, I am not sure if it is possible to record meetings in Zoom, but if it is would it be possible to record the meeting and place or post a link? I am thinking of the long term gain as a referencing as well as being selfish and not missing out :)
Just a though.
Clear skies and tailwinds
Paul

On Sunday, 5 December 2021, 01:13:25 am AEST, Sam Hoskins <sam.hoskins@...> wrote:


This month, instead of a Q-Tour, let's have an Ask the Pilots Q&A session.  This is a chance for newbies, builders and wanabes to ask the guys who are actually flying those burning questions you have. This session will most likely NOT be uploaded to YouTube.

As always, don't log in until 9:00.

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Q-List Zoom - Ask the Pilots
Time: Dec 11, 2021 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
 
Meeting ID: 741 4587 6920
Passcode: 83y89J
 


Re: Q-List Zoom meeting - Ask the Pilots - Saturday 11 December

Paul Poulsen
 

Hi Sam,
Thanks for organising this, it will be a great benefit to those of us stuck in the holding pattern of building/restoring.
As it will be 01.00 here, I am not sure if it is possible to record meetings in Zoom, but if it is would it be possible to record the meeting and place or post a link? I am thinking of the long term gain as a referencing as well as being selfish and not missing out :)
Just a though.
Clear skies and tailwinds
Paul

On Sunday, 5 December 2021, 01:13:25 am AEST, Sam Hoskins <sam.hoskins@...> wrote:


This month, instead of a Q-Tour, let's have an Ask the Pilots Q&A session.  This is a chance for newbies, builders and wanabes to ask the guys who are actually flying those burning questions you have. This session will most likely NOT be uploaded to YouTube.

As always, don't log in until 9:00.

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Q-List Zoom - Ask the Pilots
Time: Dec 11, 2021 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/74145876920?pwd=T0tlRmJIdGFncHJKTUJqNWt4eU5pQT09
 
Meeting ID: 741 4587 6920
Passcode: 83y89J
 


Re: Fuel pump & condition inspection

Eugen Pilarski
 

Sam, did you have a part# from your pump and the filter?

Best regards

Eugen 

Am 04.12.2021 um 22:11 schrieb Michael <dunningme@...>:

Sam,

What's this thing? Fuel flow?
<1~2.jpg>
--
-MD
#2827 (still thinking about planning on visualizing how to finish building)


Re: Fuel pump & condition inspection

Sam Hoskins
 

It's an obsolete gascolator. If you have a chance to buy one, don't bother. The clear tubing is for my static ports, just moved out of the way whilst changing the pump.

Sam

On Sat, Dec 4, 2021 at 3:11 PM Michael <dunningme@...> wrote:
Sam,

What's this thing? Fuel flow?

--
-MD
#2827 (still thinking about planning on visualizing how to finish building)

2861 - 2880 of 56079