You're invited to view my online photos at the Gallery. Enjoy! You're invited to view these photos online at Kodak Easyshare Gallery! Just click on View Photos to get

Thanks Brad, this coating thing is getting interesting. Ron T Ron & Carolyn Triano Q-200 N4710P

All, Larry Koutz just listed some items that he may make available at the up-coming Tandem Wing Spring Fling, May 20 and 22. I'll add to the pot: For Sale: Q-2/Q-200 cockpit canopy, clear and

Guys, I found a problem which maybe only affects me, but maybe not. Nearly twenty years ago, the original builder of my Q followed an instruction in the builders manual and "trundled down to the local

I have been following this thread with some interest and having faced the same problem, decided that there had to be an easier way without bending and without resorting to steel. Here is what I

Chris I was told by my original builder to use only ATM fluid as brake fluid will spoil the large O ring seals. I have used this for 15 years with absolutely no effect on the seals and this fluid is

I am going to be coming to the "Spring Fling" but I will be driving as, unfortunately, as my Corvair powered Q is not yet done. I have a few aviation items that I wish to sell and can bring them

I'm liking it. http://maps.google.com/maps?q=jean+nv&ll=35.773373,-115.326490&spn=0.027122,0.04 2400&t=k&hl=en Left click (and hold) on the image and move your mouse to scroll around. Pat

Brad------------ I have a complete Q-200 kit that has never been started. It has all that's needed to build except the engine ,epoxi and wheels. I am located in Geraldton Ontario Canada. I want

want a Behalf with and airplanes.

Neil, My 4:1 is steel. I did some welding on it and had the whole thing recoated black this time. The coatings hold up well with no rust. Jim P. P.S. Ron I will try to find the supplier but have

As I recall the white coating is 1300 degrees and the black andaluminum is 2400 degrees. Jim P the when I I was for Behalf Of Behalf Of Behalf Of Behalf Of help and ... pipe place the heat waste

Jim why did you do it twice? Did the first one fail or did you want a change of colour? neil rondefly@... wrote:

Jim, do you remember the name of the place in Redwood City? I could not find it on the web. Ron T Ron & Carolyn Triano Q-200 N4710P

Thanks! I had heard between $175 and $225 for the Revmaster pipes. Jim got a good deal for only $75. Jim, Do you recall if you got the 1300 or 2400 degree stuff? Dave

Dave Don't recall the temperature rating as it was almost 7 years ago when I had my pipes done. The finish is the standard silver(ish) color and as I recall, the cost was around $175. They do nice

Hi Greg, Did you use the 1300 degree or the 2400 degree stuff? Do you recall what you paid for them to do yours? (Q2 or Q200)? Thanks, Dave Richardson

This is the place I used and they do nice work! http://www.jet-hot.com/ Greg

Thanks Jim, I’ll check it out. Ron T Ron & Carolyn Triano Q-200 N4710P