Peter, Yeah... well all I get is a big sorrry too bad so sad. No offer of reimbursement. What's a guy to do but punt. They would make a good spinaker pole for my sailboat though too. Thanks for the

I will put a picture of the 8" travel actuator on my web site, It weighs 2lbs. It will push 250 #. Might even open the canopy. Ron T Ron Triano

Maybe someone has been there and done this. I had a veneer 5' cable with a black knob. As it turns out I need a 6' cable with black knob and a 5' with red knob. I called ACS and they said the knobs

Sam , the overall length is 88" so no go there. Regards, Damian Gregory N8427 Q200

Damian, Have you checked the diameter of these spars with the LS-1 templates? You may be ok if the overall length is still 100". Regards, Sam damiantwinsport@... wrote:

Years ago I installed a Mikuni carb on my Onan powered Quickie. I thought the carb was too big (28mm) because it ran better at less than 3/4 throttle.After working with it foe a while I installed the

Doug, Phil said they were Q200 spars and I sent him a cashiers check at his request .when they got here I measured them and they were too short and the Dia. did not match Peter Harris' info by alot.I

Guys I will be travelling for a month and offline so please don't do anything exciting or I would miss it. Peter

Damian if they were sold to you as 0-200 spars and they are not then maybe you could get a refund. Seems like someone might have shortened the spars for use on a Q1 then found them too thick. Peter

What do you mean the spar was 20" too short??? Isn't it based on the original Quickie spar? Doug "Hawkeye" Humble www.asignabove.net Omaha NE N25974

Ron good to hear from you as a matter of fact I have been getting alot done on the firewall ,I have my engine mocked up. The swing away mounts on , the removeable firewall box installed just have to

Say Damian, You have been pretty quiet lately, getting any done on that canard? Will you be coming to the livermore fly-in? Guess that's the next one for me. Been too busy, and Momma's to do list is

Losing weight is simple ,put a smaller battery in and remove that electric srarter . Hand crank it like I saw Sam H doing. (crafty devil) Regards, Damian Gregory N8427 Q200

Say you VW types, I have a lead where I can get many VW engine parts including several complete engines, probably 10 rebuilt heads Pistons, Cylinders, etc. What should I look for to see if they are

1HP for high pressure. Bruce -- "q2fun" <q2fun@...> wrote: Hello All, I have seen people using Fram oil filters on their Revmaster engine. What size filter are they using? What other

Nah -- shedding 30 lbs. -- its a new diet. Wasn't that Jim on TV? Carefully selected amino acids and helium? Mike Perry

Hello All, I have seen people using Fram oil filters on their Revmaster engine. What size filter are they using? What other options are there? Thanks for your help, Tim Bryant State College

And I thought I was done with Resin, arrrrrg. I am putting 3 pictures of my aux tank on the Q list picture file. Will also put them on my web site. Ron T Ron Triano

Hmmmmm......He really is not giving us very many clues at this point. Wants to keep up with Sam and shedding 30 lbs. - must be somethting with the engine......hopped up Jabiru maybe????? LF

You can never have too much power. My first Quickie had the 18Hp engine which had the new heads which brought it up to 20Hp. Climb is terrible but it will scoot along at 120MPH all day. Reduce the