Sorry, I wrote "over 40 mph with the VW engine or at slower speeds" but I meant over 40 miles per gallon with the VW or at slower speeds. Mike Perry

Damian and others, I just uploaded 3 more picts to the Q list photos and 2 to my web site for the Q200. I am just about ready to glass the upper portion of the plenums, have them removed from the

Ron, thanks I have a bit of Space isssue at EAA 96 hangar so I am trying to optimize/ minimize space usage. Their 20' X 20" spaces are a bit exaggerated Mr. tape measure says they are 18.5X18.5.

Damian, When I did the wing and canard I did them at the same time, 4' worked out fine, for just one 3' would be fine. Ron Ron's Quickies, Page 8 is the Q200 and 9 is the

Makes sense , Did you find that it was a big reach though? Regards, Damian Gregory N8427 Q200

Ron and thanks for the departure info I made it with 30 min to spare. Regards, Damian Gregory N8427 Q200

Thanks Ron. Regards, Damian Gregory N8427 Q200

Thanks for reply.Why not 3' I am cheap MDM comes in 4X8 sheets Means I would have to buy 2 sheets. That is OK though I do not want to be too crowded on the bench. Regards, Damian Gregory N8427

Thanks Sam, Earthquakes? This is California.... oh yeah.... thanks. Is 2' wide enough? Regards, Damian Gregory N8427 Q200

Hi Doug, As a pilot for Flight Options on the Hawker, I don't know when I will be in Omaha again. Sometimes our trips can change even after we takeoff. I knew it would be a slim chance that our

Hi Dave -- I once considered buying a Katana so I'll take a shot at this. You are talking about two totally different aircraft. The Katana is a trainer, flies safe, lands slow (about 50 knots on

2005 Registration Form 15th Annual Field of Dreams Tandem Wing Fly-in Sullivan, Missouri (Previously held at Ottawa, Kansas and Burlington, Kansas) Friday - Sunday, September 23rd, 24th & 25th,

Dave, Read all the back Qlist emails but... Q200 in my opinion is the most reliable with the Cont 0-200A engine. What's a Katana - I don't really want to know - obviously I can't do the comparison. If

Ps to the note about the tables, I made them the same height as the rest of the equipment in the workshop. Ron Ron's Quickies, Page 8 is the Q200 and 9 is the

Similar to what Paul did, When I made my Dragonfly canard and wing I made 3 tables with wheels on them which I use to this day. They were 6'X4'. Ron T Ron's Quickies, Page 8 is the Q200 and 9

Rene & Melinda, I'm so glad you two had a great time, hope to see you at another get-together. Was nice to meet you both. Ron T Ron's Quickies, Page 8 is the Q200 and 9 is the

Yes, but you will need to build a small extension at each end to accomodate the wing tips and the BL100 jig. No problem, they will only extend 4 to 5 inches and be only about 10 inches or so long. But

Make it 18', so you can support the tips. Just make it sturdy enough to survive an earthquake. Sam _____ From: Q-LIST@... [mailto:Q-LIST@...] On Behalf

Folks ,what are the ideal dimensions for table to build LS1 canard on? Willl a 2' X 16' be enough? Regards, Damian Gregory N8427 Q200

Rene, Glad you made it back home safe and sound. It was very cool to meet you and Melinda and very unexpected. Regards, Damian Gregory N8427 Q200