Look here for a useful

Double Ditto on everything Sam and Paul said! JPatillo N46JP Q200 said, It's to do extension in the

You guys have better tubes than I do. I find that I need to reair the tires every month or so, although I am running 30 psi, not 50. I have a hole in the wheelpant, an improvised tool to remove the

Bob, The nose gear is made by Scott Swing. His family owns Velocity Aircraft. I do not know of any just lying around. We need to get a group together and have him make up several. Are you going to the

I agree Doug, and I drilled that hole in my wheelpant. Problem is that I have NEVER used it, not once is over 16 years. As Sam said, learn to pull the wheel out. Pulling the wheels to inspect

You're right Doug. There is a plane called an Eagle 150. If you are on AvWeb this link should work http://www.avweb.com/news/newacft/182746-1.html We saw this plane as Sun 'n Fun several years

Ritz, I pondered about it awhile. I then drilled a hole about 3/4" diameter directly under the axle and carefully aligned with the valve. I couldn't use my car foot pump as the connector is not the

I have a hole in the wheelpant where I can stick a stem extension in and fill the tire without removing it. The only trick is drilling the whole in the right location. Good luck. Doug "Hawkeye"

Getting close on my triQ-200. Need to find a heavy duty nose gear! Any suggestion. Bob Clark Ankeny Iowa --------------------------------- How low will we go? Check out Yahoo! Messenger’s

Please don't take offense Chris - but I think the "flogging" was before you acknowledge you wanted to make significant changes to the Quickie design. This list isn't meant for those kind of

Ritz, Learn how to pull the wheel. It's pretty easy, check the plans under the wheel assembly area. I have not found a suitable extension that will allow filling from the outside. Maybe Patillio or

Here is what has me all fired about about a stabilizer and elevator on the Tail: Quote: Hi Chris, Here is quick summary of what I know about adding a T tail to a tandem Wing airplane: 1. DO NOT

No , you are fine Ron, I looked at the archives and I saw a balloon was used but I did not look very long at the post. I was fighting with work comp yesterday I still cannot walk without aid and

I would just drill a hole where it is large enough to fill with air. Mine is about 1". After you drill it scrape out some of the foam and replace with flox. Ron Sonerai flying and Q200 gettin

Darrell, Hope I did not sound rude, did not mean it that way. A manometer is a very sensitive gauge operating on pressure or vacumn theory. A balloon is also a pressure test but the only way you know

Chris, I was thinking one goy on the group had a T Tail and took the tail off. Darrell

David, Thanks for responding... I, if I am being told accurate information is that the performance envelope of the Q are opened up with a T- Tail allowing slower approach speeds if the a stabilizer

What was the project? David J. Gall

Ritz you can buy a valve extension which screws onto the stem and extends to the rim where you refit the valve itself. Tip :remember to rebalance the wheels. Peter _____ From:

Hi RITZ I hate to tell you this but if you can't see the valves you've got to remove the wheel. Mine's the same way Dave D q2blueskies <q2blueskies@...> wrote: Hello evryone