main@Q-List.groups.io

Re: Oh @*&^$&$!!!!!

Sorry T, Guess you'll have ta' buy da' movie. Hey, kin' I have yer extra meal. I wanted to get 1st dibs afor' Jimmeh or some one thunk of it. Wish you could make it but I understand. Paul F. and I

By Bruce Crain · #441 ·

Re: Oh @*&^$&$!!!!!

T: I applaud your ability to error on the side of safety. It is totally the right decision. It isn't worth breaking something. However, it truly is unfortunate that you won't make it to Ottawa this

By Fisher Paul <FisherPaul@...> · #436 ·

Ezpoxy/AeroCad

Greetings All, Just a plug for Jeff Russell. I'm still using EZpoxy as I've got one of those gee whiz epoxy pumps that works with that and it's great in humid areas. Wick's and AS quit selling

By mbrowner1@... · #440 ·

Re: Painting Problem

Thanks folks for all your help. This really demonstrates the power of this Q-List tool. Back to sanding...

By Dave Richardson <dave@...> · #435 ·

easy VGs

Has anyone tried overhead projector sheet (Mylar?) for VG material? I mounted them but have not flown with them yet, let me know if it is a bad idea. They are very, very easy. You print the

By Edward MacLeod <ed@...> · #434 ·

Re: Painting Problem

In a message dated 9/25/00 5:27:21 PM Mountain Daylight Time, n1victor@... writes: << Hi Dave, If you have a PPG paint dealer in town get some DX330 Solvent, it'll remove silicone based

By Hot Wings · #439 ·

Re: Questions and help

Jon Finley wrote: Jon, thanks for giving me the big head. I am no authority but I have seen enough and built enough to learn a little. Back around 1986 I purchased a set of Co-Z plans for the 3

By Jeff Russell <Jeff@...> · #433 ·

Oh @*&^$&$!!!!!

Ottawa bound Q-Guys, This weekend, I came to the rude realization that my flight to Ottawa in my Q-200 is not going to happen. While final machining the rocker arm shaft bosses on the number two

By terry.l.sickler@... · #432 ·

Re: Painting Problem

Wow!! When did you join us Jeff?? I had no idea we such an authority among us!! Welcome and please jump in as often as time permits! For those that don't know Jeff has been in the composite world

By Jon Finley <finley@...> · #431 ·

Re: Painting Problem

Dave Richardson wrote: <snip> If it was WD40, the grease could be down to the glass and must be removed before anything will quit leaching it to the paint. 1) Sand the micro down to the glass. 2)

By Jeff Russell <Jeff@...> · #429 ·

Re: Painting Problem

"Michael D. Callahan" wrote: ...then there's the issues of any chemicals leaching in and attacking the foam core. Pat

By Pat Panzera <panzera@...> · #428 ·

Re: Painting Problem

Dave, You can try wiping it down with some laquer thinner, but that micro is so porous you might never get it out. Mike C.

By Michael D. Callahan <micallahan@...> · #426 ·

Re: Painting Problem

Dave Richardson wrote: <snip> Your local auto paint store will have all sorts of fun chemicals used to remove silicone, tar, fingerprints, etc. Go in and tell them what you have done, and what

By Pat Panzera <panzera@...> · #427 ·

Re: Painting Problem

In a message dated 9/25/00 11:46:15 AM Mountain Daylight Time, panzera@... writes: << > Dave, > You can try wiping it down with some laquer thinner, but that micro is > so porous you

By Hot Wings · #430 ·

Painting Problem

I found a patch on my airplane that does not seem to want to hold paint. It is located near the right elevator torque tube but on the top of the canard. It looks as though the previous owner/builder

By Dave Richardson <dave@...> · #425 ·

Please sir, may i have a ride?

Hey Quickie people, i am interested in building one of these jewels, either a dragonfly or a quickie-200, and i would love to ride in one while at ottawa, i have tried the dragonfly list

By forrest l king <forrestking@...> · #424 ·

Roll Rate

Hi Here's another one for some fearless test pilot...... I'm wondering what the roll rate is over the entire speed range. Ie roll rate from V1 upto VNE say every 10kts. If someone wanted to earn

By Dave King <KingDWS@...> · #423 ·

Re: Corvair Fly-In

Patrick Panzera wrote: Sorry.... I guess a link to the website would be helpful! http://www.angelfire.com/ca4/CorvAIRCRAFT/LaVerne.html Pat

By Patrick Panzera <panzera@...> · #422 ·

Corvair Fly-In

I'd like to welcome anyone who is interested to attend the Corvair engine forum we'll he hosting at Bracket Field in La Verne CA, the weekend of November 18-19, 2000. Hope to see you there! Pat

By Patrick Panzera <panzera@...> · #420 ·

Re: Drawing and dimensions of Q2 Q200

Bob Farnam wrote: ACAD LT wouldn't work with the DXF which was suprising. Mines V3 and it pulled in the dxf but said there were errors in the file and crapped out. I do have V12 and V9 on another

By Dave King <KingDWS@...> · #421 ·

Messages