Just wanted to invite everyone to come and checkout the updated website for Fast Little Airplanes. As we continue to move forward we will continue to update photos and parts, and would love to hear

I would like to see if we could bribe any Q200 drivers to come to KMIT on the 10th or 11th and provide my son and test pilot a ride in a Q200? He has 40+hrs in the TriQ and quite a bit tail wheel

Hello Everyone, I have spent some time checking out information here on the Q-list. There is a ton of information, however I find the system clunky and inefficient. I have built a Stratux ADS-B

Not officially. Sam we will probably do a special event soon, but I am gone for the next couple of weekends. Weather is getting very good here so it will be soon. I will keep in touch. I really

Has the BBQ been re-scheduled?? Sam Kittle

And anyone that comes down to see us is welcome to try any of these props if you like. Cheers.

On the TriQ200 we have a 62X68 Performance Prop torqued to 30 foot LBS, 2400 static and 2900 WOT. Installed the 60X72 Catto also at 30 foot lbs. Turns 2300 static and 2800 WOT but is 5 mph faster

Hi Jim, Is that 2500 rpm at WOT? Cheers, Jay

Thanks, Jim. I really feel the need to understand the engine health so gotta get the EIS installed. The current system has Western Gages and I don't trust them. This engine isn't souped up and I plan

Hi Phil, I installed anpolished aluminum spinner on it. Front 3/8" aluminum bulkhead is beveled to fit the spinner and wrapped with self bonding rubber to keep the spinner running true. Static rpm

Hello Jim: did Cato supply that prop with a spinner prefitted or did you have to sort that all out? What is your static RPM and what do you like for cruise RPM? Cheers, Phil

Phil, 60x72 Catto. Torque 30 foot pounds. Prop has built in backing plate so torques are higher. Jim P N46JP Q200

Thanks, Paul. I have a new Sterba so this helps indeed. I also have an older Prince P-tip and I am trying to get a few things sorted out. I have been doing some engine runs on 84RC. The first run up

Don't get inch pounds mixed up with foot pounds or you will squeeze the wood prop''"Paul Fisher rv7a.n18pf@... [Q-LIST]" wrote: Sterba 60x68; torqued to 18ft.lbs. Hope that helps. Paul

Sterba 60x68; torqued to 18ft.lbs. Hope that helps. Paul Fisher Q-200 N17PF

Hello Q-200 Tail Wheel Guys: What prop brands, pitch and lengths are you running? What torques are you torquing to? Cheers, Phil Lankford

Thanks Bruce, Just calculating if there is potential "conflict" between my prop tips and the nose wheel fairing (yet to be installed, and will not be when I test fly). I already have my prop. It is

Hi Bruce, What is the length of your prop? Cheers, Jay

Interesting article on primer bulb installation: http://continuouswave.com/whaler/reference/primer.html Phil Lankford