|
Re: Flight Report [1 Attachment]
Nice report Mike.
Got my annual done today and flew in circles around DEH, looking down and enjoying the pleasure of flight, for an hour, just because I could.
BTW it was 34°F during flight. Cabin
Nice report Mike.
Got my annual done today and flew in circles around DEH, looking down and enjoying the pleasure of flight, for an hour, just because I could.
BTW it was 34°F during flight. Cabin
|
By
Kevin Boddicker
·
#47004
·
|
|
Re: Flight Report
I think I got the plane I parked next to... An F-11 Tiger. 200 built.
https://www.popularmechanics.com/military/aviation/a27967/the-fighter-plane-that-shot-itself-down/
Mike
I think I got the plane I parked next to... An F-11 Tiger. 200 built.
https://www.popularmechanics.com/military/aviation/a27967/the-fighter-plane-that-shot-itself-down/
Mike
|
By
Mike Dwyer
·
#47003
·
|
|
Flight Report
The Valient Air Command museum at Titusville FL (KTIX) was hosting an open house at the museum with cars, RC planes, Military aircraft and food! KTIX is the closest airport to Cape Canaveral. I
The Valient Air Command museum at Titusville FL (KTIX) was hosting an open house at the museum with cars, RC planes, Military aircraft and food! KTIX is the closest airport to Cape Canaveral. I
|
By
Mike Dwyer
·
#47002
·
|
|
Re: Building a Q1
Exactly what Lapo said, the plans as pdf's are all over the internet as well as the pilots guide.
From what I've learned combing through here and the QTalk archives is that the belly board mod is
Exactly what Lapo said, the plans as pdf's are all over the internet as well as the pilots guide.
From what I've learned combing through here and the QTalk archives is that the belly board mod is
|
By
C R
·
#47001
·
|
|
Re: Building a Q1
Lapo,
1. There are no "design rights" but there is a copyright on the plans. There doesn't seem to be any interest in enforcing that copyright, however, as PDF copies are abundantly available. Good
Lapo,
1. There are no "design rights" but there is a copyright on the plans. There doesn't seem to be any interest in enforcing that copyright, however, as PDF copies are abundantly available. Good
|
By
David J. Gall
·
#47000
·
|
|
Building a Q1
Hello all,
I'm looking into the possibility of building a Quickie from scratch and have been avidly reading all I can find.
I do however have a few questions (for now) which I can't seem to find an
Hello all,
I'm looking into the possibility of building a Quickie from scratch and have been avidly reading all I can find.
I do however have a few questions (for now) which I can't seem to find an
|
By
nustrini@...
·
#46999
·
|
|
Re: Composite Mold making & Drag reduction video links
Another good resource for used books is ABEBooks.com:
https://www.abebooks.com/servlet/SearchResults?sts=t&cm_sp=SearchF-_-home-_-Results&an=Hoerner&tn=&kn=Fluid+dynamic&isbn=
Another good resource for used books is ABEBooks.com:
https://www.abebooks.com/servlet/SearchResults?sts=t&cm_sp=SearchF-_-home-_-Results&an=Hoerner&tn=&kn=Fluid+dynamic&isbn=
|
By
David J. Gall
·
#46998
·
|
|
Re: Composite Mold making & Drag reduction video links
Fluid Dynamic Drag shows up on eBay every so often. I've seen it as part of a .PDF bundle for less than the books but I can't vouch for it's authenticity or quality. I got Drag and Lift a while back
Fluid Dynamic Drag shows up on eBay every so often. I've seen it as part of a .PDF bundle for less than the books but I can't vouch for it's authenticity or quality. I got Drag and Lift a while back
|
By
C R
·
#46997
·
|
|
Re: Composite Mold making & Drag reduction video links
Kevin, fabulous videos. Lots of knowledge shared. Thx for sending. Jerry
Kevin, fabulous videos. Lots of knowledge shared. Thx for sending. Jerry
|
By
Jerry Marstall
·
#46996
·
|
|
Re: Composite Mold making & Drag reduction video links
Thanks Kevin. It's a lot of material, but all good. I really enjoyed the Wheel pant design and fabrication.
The Q-2 wheel pants, as designed by QAC are very draggy and time spent improving them
Thanks Kevin. It's a lot of material, but all good. I really enjoyed the Wheel pant design and fabrication.
The Q-2 wheel pants, as designed by QAC are very draggy and time spent improving them
|
By
Sam Hoskins
·
#46995
·
|
|
Field Of Dreams 2019!
By
Bruce Crain
·
#46994
·
|
|
Re: Composite Mold making & Drag reduction video links
These Mike Arnold movies are fantastic indeed.
I was blown away by his method of making thin
sandwich wing skin panels, starting with the
Rutan technique and then taking it one step
further.
These Mike Arnold movies are fantastic indeed.
I was blown away by his method of making thin
sandwich wing skin panels, starting with the
Rutan technique and then taking it one step
further.
|
By
Rob de Bie
·
#46993
·
|
|
Composite Mold making & Drag reduction video links
These are great videos for composite construction and aerodynamics to reduce drag. Have paper and pencil ready because you can get info throughout the videos.
AR-5: Why it Goes so Fast (books he uses
These are great videos for composite construction and aerodynamics to reduce drag. Have paper and pencil ready because you can get info throughout the videos.
AR-5: Why it Goes so Fast (books he uses
|
By
Kevin Sheely
·
#46992
·
|
|
Re: Fw: Life Nuggets ... No Matter What
Oops! My bad. J
By
Jerry Marstall <jnmarstall@...>
·
#46991
·
|
|
Re: Fw: Life Nuggets ... No Matter What
Yeah, I don't like trees...
Paul
Yeah, I don't like trees...
Paul
|
By
Paul Fisher
·
#46990
·
|
|
Fw: Life Nuggets ... No Matter What
By
Jerry Marstall <jnmarstall@...>
·
#46989
·
|
|
Re: Trip report - Catalina Island
The Marines will be rebuilding the runway starting next month. AOPA
The Marines will be rebuilding the runway starting next month. AOPA
|
By
One Sky Dog
·
#46988
·
|
|
Re: Trip report - Catalina Island
Been there in the Lancair and the VariEze but not the electric Q1 (which is not yet flying, waiting on airworthiness inspection - anyone know a good DAR in SoCal?)
The surface is usually great. Good
Been there in the Lancair and the VariEze but not the electric Q1 (which is not yet flying, waiting on airworthiness inspection - anyone know a good DAR in SoCal?)
The surface is usually great. Good
|
By
Henry Hallam
·
#46987
·
|
|
Re: Trip report - Catalina Island
No, funny you ask though. I was flying right over on my way home from glamis Sunday and thought about it. You?
Matthew Curcio
419-290-3773
On Oct 29, 2018, at 20:03, Henry Hallam henry@... [Q-LIST]
No, funny you ask though. I was flying right over on my way home from glamis Sunday and thought about it. You?
Matthew Curcio
419-290-3773
On Oct 29, 2018, at 20:03, Henry Hallam henry@... [Q-LIST]
|
By
Matthew Curcio
·
#46986
·
|
|
Re: Trip report - Catalina Island
Glad you made it there and back. I've made one trip to AVX in my Lancair and that was enough for me given the runway condition. Not sure what they're doing with the $25 landing fees but it isn't
Glad you made it there and back. I've made one trip to AVX in my Lancair and that was enough for me given the runway condition. Not sure what they're doing with the $25 landing fees but it isn't
|
By
Henry Hallam
·
#46985
·
|