main@Q-List.groups.io

After further review, not Mark’s work. These look like old factory molds. Jim N46JP - Q200

By Jim Patillo · #48331 ·

These might be the molds Mark Summers made for his Q. They were nice. His Q now owned by Corbin. Haven’t compared pix for positive ID though. Jim N46JP - Q200 Sent from Outer Space

By Jim Patillo · #48330 ·

Re: Q2 fuselage molds

Under normal circumstances in California heat I'd disagree with Tom...., except in this case, because the plug was left with the mold you've got a solid shot at this. Tom is so right about the work

By Guy <rsrguy3@...> · #48329 ·

Re: Q2 fuselage molds

If you can repair/refinish the old molds you can pull a good hard part out and remake the mold if needed. It would be WAYYY easier+cheaper than scanning, cnc-ing, lofting. Especially for

By Tom Copp · #48328 ·

Re: Q2 fuselage molds

On Tue, Nov 26, 2019 at 01:16 PM, Richard Kaczmarek 3RD wrote: Those molds are going to take a lot of work since they have been sitting outside in the CA sun for many years. Definitely agree on this

By Michael Dunning · #48327 ·

Re: Q2 fuselage molds

We would be happy to sell it off individually, but we are not just going to give it away like many have done in the past. This is why these planes have lost there value.

By Richard Kaczmarek 3RD · #48326 ·

Re: Q2 fuselage molds

I guess I'll chime in here. I have a complete airframe with the cockpit only cut out I might sell. I'm also a welder/ fabricator and talked with Richard about building the nose gear but life got in

By Steve S · #48325 ·

Re: Q2 fuselage molds

Cool, Rob. I have this original document. It was included as a promotional package when I was inquiring with QAC to purchase a kit in 1983. Cheers, Jay

By Jay Scheevel · #48324 ·

Re: Q2 fuselage molds

Hi Richard, I know that it was a disappointment to try to restart the full service Q parts-supply from scratch, but certain parts are still likely to attract some buyers from the existing fleet,

By Jay Scheevel · #48323 ·

Re: Q2 fuselage molds

If you want to sell everything it needs to be listed separately especially since you have essentially no sellers feedback. I doubt there is anyone who would find that whole lot to be of value to them

By charlie · #48322 ·

Re: Q2 fuselage molds

Thanks, got it On Tuesday, November 26, 2019, 11:40:30 AM PST, Dragonfly Russell <russellaustin@...> wrote:

By skyguynca · #48321 ·

Re: Q2 fuselage molds

still no luck how are the parts listed? seller ebay ID ? these are all searchable but as q or dragonfly nothing David On Tuesday, November

By skyguynca · #48320 ·

Re: Q2 fuselage molds

https://www.ebay.com/itm/Quickie-aircraft-projects-and-tooling/333412899718?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D775cff52e90d4619a2b90718e9e2fd6c%26pid%3D1

By Dragonfly Russell · #48319 ·

Re: Q2 fuselage molds

It's under Ebay Motors aircraft

By Richard Kaczmarek 3RD · #48318 ·

Re: Q2 fuselage molds

what is it all listed under? I searched ebay and could not find anything David On Tuesday, November 26, 2019, 11:16:43 AM PST, Richard

By skyguynca · #48317 ·

Re: Q2 fuselage molds

Those molds are going to take a lot of work since they have been sitting outside in the CA sun for many years. As for making spares no one has ever been willing to pay for them. We acquired one of the

By Richard Kaczmarek 3RD · #48316 ·

Re: Q2 fuselage molds

I think there are a number of mild sets out there. I’m guessing they built a few molds and then had people in the area building from them. Matthew Curcio 419-290-3773

By Matthew Curcio · #48315 ·

Re: Q2 fuselage molds

Here are three photos that I once found, showing the molds as used by CoDevCo aka Leg-Air (as far as I know) for Quickie production. Maybe the LA molds are the same? Rob

By Rob de Bie · #48314 ·

Re: Q2 fuselage molds

Great to hear! Martin

By Martin Skiby · #48313 ·

Re: Q2 fuselage molds

i just sent him an offer (asking price). That's a short drive for me and I've been thinking for a while it'd be great to have some spares.

By Matthew Curcio · #48312 ·

Messages