Hey Bruce, Merry Christmas to you and your family. Good to hear you got er done. You can also monitor your signal output on the Echo “Config/Monitor” downloadable app. Jim N46JP Q200 Sent from

The only problem you have Bruce, is trying to decide which plane to leave on the ground! Sorry, could not resist. Merry Christmas to you and the entire group! Cheers, Jay

Sorry. I installed the Uavionics in my RV 6 so finding a ground plane was not a problem. B

Thanks Jim!! Corbin

Morning, David, I’m glad you are enjoying your new career. It was my childhood dream as well. I enjoyed and met so many wonderful people during my years at United Airlines. Memories I will never

Hi Corbin, I used the Uavonics EXT version with internal electronic plastic dipole antenna purchased from Spruce. This eliminates the need for a ground plane. No antennas outside the airframe. Echo

Hi Jim, Thanks for the compliment. I retired from that job three years ago. I’ve been chasing my boyhood dream of being an airline pilot by flying for SkyWest Airlines ever since, and I’m

Hey David, nice to see you posting again. You too have made significant contributions to the safer handling of our our planes with your posts regarding wheel alignment. Thanks again. Are you working

Jim, I’m going this route as well but have not installed yet. Did you install the ext version or the “all internal” model with the little metal antenna? I would love to see a pic of your

Jim N46JP - Q200

Good to know Jim, I’ve been looking at picking up one of those unit. Thanks for the update. Rod Herzig CozyIII N399BR

Hi all, I finally installed ADSB last week. I chose Uavonics Echo UAT/ SkyFX. OUT/IN. Flew and Passed the FED test first time with no squawks. Very easy install with only two wires (power&ground).

Hi David, I do not have springs of any kind attached to my elevator control system. Linkage consists of two pushrods attached to a common bolt on the stick. The other ends are attached to the right or

Jay, I understand that you “…do not have the elevator trim system installed.” However, please clarify: Do you or do you not have any springs “attached” to your elevator control system?

Hi Richard, My reflexor has been totally adequate for all loading so far. By adjusing power and reflexor, I can stabilize anywhere from 140 mph IAS level cruise to 85 mph standard final descent (3

Yay Jay, I think we already discussed, I have been beating my 2 brain cells together over the situation that I only have the elevator helper spring fitted (that was in when I bought FN) and trying to

Long ago I was coached that if I entered a deep stall or a spin entry that I needed to get the plane knife edge so the wings were no longer effective. Then recover from the dive at that

Larry, which plane are you referring to? Martin

I do not have the elevator trim system installed. I have been using my aileron reflexor for pitch trim since I first flew my plane a year ago. The elevator seems fully stabilized without the trim

Jay, I think to evaluate this conservatively you’ll have to disconnect the pitch trim springs since those help to stabilize the system in some ways. Matthew Curcio 419-290-3773