Was that at Mach .07? Hope this post finds you well and blessed Charlie! Bruce

Does anyone have a set of QAC 0200 baffles you would part with. I’m redoing mine and thought I would ask before I start recreating pieces. Maybe someone that had installed a plenum and don’t need

Thank you for the continuing replies guys. Here in Placer County, (roughly Sacramento to Lake Tahoe) we have 97 reported cases/2 deaths. In Alameda County ( our other residence) there are 367 reported

Uh...yes. Our EAA Chapter treasurer whom I've known for 30+ years and his wife. He took her into the hospital here in Terre Haute on March 18 and she died on the 26th. She was 55 and a diabetic. He

Hello all, I practiced awaiting for two hours yesterday, touch and go at Tombstone (graveyard airport one hanger and one the wind destroyed). Surveyed some of the southern border no bollard fence yet

Thanks all. Pat, I had plan "B" of ordering a sheet from the quickheads website if I had to go that far. Thanks though for your generous offer. Dustin

No but I did stay at a Holiday Inn Express! B

My thinking is that amount of difference will be insignificant. The fact that it matches the spar is a plus. The difference will be even less because of a little melt back from the hot wire as Bruce

I just noticed the message title (plan shrinkage), so forgive me for butting in, especially if someone else has already offered to help, but I have a large format scanner, and if someone sent me a

Checked BL-0 and BL-100 and compared to plans. Both are 1.5% longer in length. That's 3/16" longer @C.L. and 1/8" on the tip template. This measured from the front of spar to LE along the level line.

What kind of percentage difference are you finding, Dustin? If it is not large, it is probably not worth worrying about. Just so the level lines are level. Cheers, Jay

Thanks Bruce. I'll check. Dustin

Nice video Jerry! Definitely would love to see that museum in person. The person flying that drone must have been a drone racing league participant. He did an awesome job of covering the place.

I'm up for it. You too. J

Jim, There have been 5,316 deaths reported so far from COVID-19, or one death per ~66k people in this country, If you have 66k contacts, then on average you would expect one of them to be dead. In a

negative here in dallas

Well, I have to add two more to my earlier list of just one. I just found out this morning that a friend here in Texas, and his dad, both have tested positive. Only his dad is in the hospital at

Good on ya Sammy!! And probably at Mach .3 or so!!! Bruce

I think Norm Howell May have over sized his cores and then sanded them down to size but that may be a rumor. As for the ones that were to small perhaps the hot wire was to hot or was pulled along to

Nice Jerry. Maybe we should plan a fly in there sometime and have fun!!! All stay well! Kevin Boddicker TriQ 200 N7868B 505 hrs Luana, IA.