Hi Bruce, Just a note concerning the EGT and CHT thermocouples passing through the firewall. I originally planned to run the EGT and CHT connections through the large connector that Corbin showed

Bruce, I use automotive Weather Pack connector in several places. For my EGT/CHT wires I use B&C knife connector, covered with heat shrink. Sam

Yes, in fact all of my electrical and engine probes pass through these type connectors. I have three on my firewall and have appreciated them each time I have needed to remove the engine; making it

Corbin and Jay this might be just the right stuff! Do you think the barbs will connect a strong enough signal for egt/cht ie tight enough for good transmission for those gauges? Also, what diameter

Hey Bruce, I have the ones attached; referred to as MIL connectors (MIL-DTL-5015). Is this what you are looking for? McMaster has them. Corbin -- Corbin N33QR

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the main@Q-List.groups.io group. /01-09400 Styrofoam XPS square small

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell

I am so thankful that the Zoom meeting was preserved and placed o to YouTube. I just viewed it and I am really glad to have gotten to see it. I could have set my alarm to watch it live at 6:00 AM

Hi Bruce, I have several metal bayonet type connectors on my firewall. everything disconnects at the firewall on my rig. One is a 24 conductor 1.25" diamerer, that handles all the various engine

It seems like Justin Mace had a connection for multiple wiring bundle with a screw off quick disconnect that went thru the firewall. It was fireproof and soldered on the inside with barbs like molex

Hey guys, I’m in another group and if they plan running long , everyone signs off for 5 or 10 minutes then back in again. Get another 40 minutes that way. MikeQ200wannabe

Can, if your possible to find, we have a different builder/owner/flyer do one of these each week, bi weekly or monthly? I really liked the video summation of the plane and panel. Almost seems that 40

Great idea; loved every minute of it! I had to watch it later on YouTube (kiddos) and really appreciate Sam taking the time to make that option available. One suggestion: I totally understand Sam

Some Other Guy, INDEED ! J.

I just watched the video of the Q-List’s First Zoom Meeting. I must say it came off without a hitch. A job well done to both Kevin and Sam. Thanks for sharing, Rod Herzig

Thanks Sam and Kevin and all .. enjoyed watching the YouTube .. i have a Tri Q finished airframe in the Hanger .. but on the 'back burner' .. Looking fwd to the next one already , Cheers from

I really enjoyed the video replay. Kevin was Mr. Cool! Thanks Sam for putting the video up on Youtube. I can try doing a Zoom with my wife from the hangar, just on the off chance that I can get a

I’ll be sure to watch the next one. Was in the hangar and couldn’t get decent reception. Thanks, Adam Hied

Great Job Sam and Kevin!! I watched the recording on YouTube as I will nearly always be flying on a Saturday at 0800 (mountain time). It was SOOO refreshing to watch something that didn't mention

Sam, Will watch later today. Probably be embarrassed seeing ME on video. All, Thanks for all the kind words about this event. I really enjoyed it. Sam asked me if I was nervous. I told him “I’m