I don't have a password as I did not sign up for the new group/forum...

Easiest way is to do it yourself using the links available. You can unsubscribe or manage your subcription with the links. Corbin Ge!ser -- Corbin N33QR

Hey Kevin and Sam, Unfortunately I was unable to participate Saturday. Kev I still love your MidWest humor. Great job guys. Be safe! Jim N46JP - Q200 Sent from Outer Space

Can someone, pretty please, remove me from this list?

Bruce, I use one 24 pin Molex twist connector for everything including CHT/EGT. Connector is bulkhead mounted on firewall in front of pax rudder pedals. Jim N46JP Q200 Sent from Outer Space

Hi Bruce, Just a note concerning the EGT and CHT thermocouples passing through the firewall. I originally planned to run the EGT and CHT connections through the large connector that Corbin showed

Bruce, I use automotive Weather Pack connector in several places. For my EGT/CHT wires I use B&C knife connector, covered with heat shrink. Sam

Yes, in fact all of my electrical and engine probes pass through these type connectors. I have three on my firewall and have appreciated them each time I have needed to remove the engine; making it

Corbin and Jay this might be just the right stuff! Do you think the barbs will connect a strong enough signal for egt/cht ie tight enough for good transmission for those gauges? Also, what diameter

Hey Bruce, I have the ones attached; referred to as MIL connectors (MIL-DTL-5015). Is this what you are looking for? McMaster has them. Corbin -- Corbin N33QR

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the main@Q-List.groups.io group. /01-09400 Styrofoam XPS square small

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell

I am so thankful that the Zoom meeting was preserved and placed o to YouTube. I just viewed it and I am really glad to have gotten to see it. I could have set my alarm to watch it live at 6:00 AM

Hi Bruce, I have several metal bayonet type connectors on my firewall. everything disconnects at the firewall on my rig. One is a 24 conductor 1.25" diamerer, that handles all the various engine

It seems like Justin Mace had a connection for multiple wiring bundle with a screw off quick disconnect that went thru the firewall. It was fireproof and soldered on the inside with barbs like molex

Hey guys, I’m in another group and if they plan running long , everyone signs off for 5 or 10 minutes then back in again. Get another 40 minutes that way. MikeQ200wannabe

Can, if your possible to find, we have a different builder/owner/flyer do one of these each week, bi weekly or monthly? I really liked the video summation of the plane and panel. Almost seems that 40

Great idea; loved every minute of it! I had to watch it later on YouTube (kiddos) and really appreciate Sam taking the time to make that option available. One suggestion: I totally understand Sam

Some Other Guy, INDEED ! J.

I just watched the video of the Q-List’s First Zoom Meeting. I must say it came off without a hitch. A job well done to both Kevin and Sam. Thanks for sharing, Rod Herzig