One popsicle stick on either side of elevator is the clearance for the elevator slot. Jim N46JP Q200 Sent from Outer Space

I am starting to mock up the elevators on the Q200. I can't seem to find any info on the clearance between the elevator and the elevator slots. Does using the aluminum hinge fittings for reference

The tubing coming out of the pant was going to make too sharp of a bend, especially with any movement. I did the big loop to relieve stress and covered it with tubing to prevent abrasion. Sam

That's the plan, once I make a set and verify fitment. Say, what's the big loop of tubing for in your brake mount picture? -- -MD #2827 (still thinking about planning on visualizing how to finish

Hi Kieth, I’m no expert ... but I use ‘Vimeo’ to transfer video’s ... it converts vid into a hyper link ... and so sends easy ... there the free version which I use ... is

Hi again, I have a video file I'm needing to upload to the Google Drive. The file is on my iPhone 8, I have the Google Drive app loaded but it does not seem to transfer. I tried plugging the phone

I agree with the group on this, Chris. Build aileron assembly per plans, or close to it. No need to alter a good design. It will save you time and hassle in the long run. Cheers, Jay Sent from my

Simplicate and add lightness.

Nice Mike. How about creating a folder for these parts in the Files section of the Q-list site?

I’ve learned a ton from this group. One consistent theme sticks out all the time from those with great experience: keep it simple and don’t fix what’s not broken. Corbin -- Corbin N33QR

Just follow the plans. A mid span hinge would serve what purpose? The ailerons are simple, best to keep them that way. They are a low maintenance item and as far as my experience goes, don't need

Sounds to me like you are trying to fix something that isn't broken. The plans mounting of the ailerons works fine. I have to take the tailcone off to remove the ailerons, but I have to do that at

Flipped the wing upright today to install the aileron slots. Any different ideas on mounting the ailerons? How is the best way to make an aileron to fuselage fairing? I am setting mine up a bit

Jans with the Hawaiian shirt, and Steve Ham two to his left. Buddys from Indianapolis. Don’t ask me why I remember all this trivia, but I can’t remember yesterday!!! Sam Kittle’s ear!!! Blue

Hi Jay, I saw the registration history too but wondered what gave reason for the deregistration. I saw he is from Indy, Thanks Sam for the info. Definitely looks like a Polish name.

I ended up with a section of his fuselage as bonus, along with my Q project I picked up in Indiana back in 2008. I recognize the paint scheme. Sanjay

Richard, I would leave the roll trim where it is. Wish I had mine like that. Now that it is flying I don’t want to take the time to “fix” it. Stub arm was there when I got the project. I think

Janusz Jaworski is how he spells it at least. Corbin Ge!ser -- Corbin N33QR

Boddicker and I were just talking about this guy. Kevin remembered his name as Jans Joworsky. Paul

That was the Polish fellow that bought this cute to with the goal of landing and each of the lower states is a fundraising drive for 911 victims. Shortly after that accomplishment, he got caught in a