Eugen, That is the correct stuff. -- -MD #2827 (still thinking about planning on visualizing how to finish building)

I found a small throw linear actuator that drives .75" with 30 ft/lbs of force. Does not move or freespin if power is lost. I think it weights 12oz?

There are many systems for Reflexor. My control for it takes more pressure than I'd expect a servo to handle. I also don't see it as a good elevator control. For instance, in flight I like to

What's the approximate linear throw of that mod?

Hello Q-groupe, is there information available which Uni- and bi-directional glass are using to build the Q1? Which weight is requested ? Im right that is that stuff requested at that link form

First put on your calendar for September 2021 that you will be traveling to Enid. Imrann has his Q in progress at Cushing last I hear. Imraan and his wife Rachel are partners of the FOD gathering in

I haven't read through this and I'm sure the answer is in here somewhere, but what specifically are you looking for? Sorry for being lazy but I may know where there is a small cache of foam.

So far I only know of you and Bruce. Ive met Bruce already since he graced me with his plane for an afternoon. I think thats when I fell hard for quickies. It felt so natural. I'm also joining the EAA

Mighty slim pickins...if you were to ask my former bosses. I tend to agree with them now that I am not a cubical rat anymore. As M.E. we tend to think a bit differently than Design or Stress. Charlie

Rob, I referred to some of the other guys with successful airfoils using DOW brand blue 2lb density XPS Foam. My understanding so far is its a suitable replacement. I started this foam search a few

Vern, I would love to spend an afternoon if possible picking your brain. I just live in Bartlesville so ot wouldn't kill me. Lmao but you might get tired of me. Cody

You bring up a great point here, Rob. John Mansfield also produces the XPS foam products. Sources are absolutely important in our requirements. It is also true the original orange foams probably are

I would agree.. I used CATIA V5 and V6 at my Contract jobs in the factories to generate CAD. Sometimes in the M.E. world we would have to "one off" or such for AOG or a short run of part for

Check pics of Sam Hoskins install. I believe it was him that accomplished the same goal with a far simpler solution. Brian

Does anyone have any schematics for the rudder bellcrank mod? I've seen the pictures of it installed, but I need further help.

Ryan I ended up using this, rewiring it to my application. I learned quite a lot during the experience, trying different modules, breakout boards, power supplies, etc. This works with my Avare and

Cody, Ask for Dow Styrofoam XPS PIB at your local industrial insulation supplier. Or call your local taxidermist and ask where he gets his foam. I got nine foot long FB blocks that were 10”x20”

Can you elaborate please?

To much friction. B

Hey Dave. I have not done this but I am a cyber engineer with a system of systems engineering background. I'm not sure where you're located but I would be happy to help you figure this out. PM me and