I’m with Phil on this one. It’s a leading edge. Jim N46JP Q200 Sent from Outer Space

I would just use bondo, then sand it down flush, paint it with some matching white urethane (just use a brush and do several coats 20 minutes or so apart). Wait for it to thoroughly dry, then go at it

Mix up a little cotton flox and epoxy and shape it to your liking. Phil

What’s the recommended fix for this bit of damage to the canopy edge? I’m only assuming my avionics guy left something hanging out of the cockpit and then shut the canopy. But it wasn’t there

I'm looking for a top and bottom cowl How much? Mike 705-774-3275

I have a nearly complete plane. Wings, fuselage with tinted canopy installed, most all the hardware, wings with the wadalow layup. LS canard, control surfaces etc. No cowlings. There is a bunch

Bakersfield, CA -----------------------------------------From: "Anthony P" To: main@Q-List.groups.io Cc: Sent: Wednesday November 11 2020 12:27:12PM Subject: Re: [Q-List] Q-2 /Q-200 parts for sale

Mr. Martin Skiby, where are your parts located?

I have a set of wings and the LS canard has a spar in it. But I don't want to break up the kit so if he wants they he would need to buy the whole thing. Then lots of spare parts he would have

Anyone interested? Contact me at jnmarstall@...

Hi Stan, WE have a non profit group (501c3) called HAWK Aviators, that has kids learning to build airplanes and fly airplanes, here in Mack Colorado (https://hawkaviators.org/). I just forwarded

no wing parts, thanks

Cody Craig needs a carbon fiber spar if you have one! Bruce

Gang, I have some factory new Q-2 parts for sale. I need them gone fast. If you belong to a EAA chapter of have another 501c3 org I will donate them. top and bottom fuse. top and bottom tail cone

The following files have been uploaded to the Files area of the main@Q-List.groups.io group. /Pilot Operating Handbooks, POH/Q2 QAC POH.pdf By: Sam Hoskins Description: The

Huge! Many thanks Eugen! I am about to start my q1 project, shop (garage) almost completed, tooling is missing. Regards, Gabor from Hungary

Dear Q-Experts, please find the link to the files I create to upload alternative supplier and technical Specification/technical data sheet to fill the bill of material with more information during my

My apologies. Yes sorry I should have started earlier in the conversation. Carry on. Interested to see the outcome. Martin

Martin, I think you are missing the first update from this morning (it is the one you replied to). Setting up per instructions and firing it up with the starter did not work. The rocking of the prop

Dude you are fighting yourself on this. Set it up as the instructions show and fire it up. Rocking the prop back and forth and trying to get a spark is frustrating you. Try using the starter and