Corbin, NEVERMIND. I guess I hit “send” too soon; I just found them in a subfolder I didn’t know I had. <shrug>

Corbin, if you’d be willing to share your scans it would save me some time. I intend to redraw mine in CAD before I build anything from them….

Hi Don! Welcome to the group! It’s a sexy airplane isn’t it! Bruce Crain

That's the thing; I'm not really sure which sheets I need since I've never actually seen them. The firewall and GU canard + wing templates is what started the search. Just wanted to make sure I hadn't

Corbin not sure I need any, I just wanted to join this group. I built a Q-2 in the late 80's and no longer have it. I wrecked it and sold as is to someone. Flew it for 5 years prior.. I just would

I believe I have them all scanned at a resolution to print large scale. Which one(s) are you needing? Corbin -- Corbin N121CG

I also have a full set. I can get them scanned 1 to 1 on a full sized scanner if there is a need. Which sheets are you specifically needing? Cheers, Jay

Good question. I have mine but I’m guarding them jealously. What do you need?

Is the only remaining source of the large appendix sheets and airfoil templates the Q2 info package from Quickheads/Canardzone? Mine were "consumed" in the building

Eugen-------------- I dug out my old construction pictures from the Q1 I built in 94.  I did lay up the glass on one side before turning. Then layed the glass on the other side. Then stand on nose

Eugen------  I think the main wing cores need to be glassed before flipping and then you join the aileron cores, and glass them,  At least that is how  I remember it on my Dragonfly and Q200. I

See Photo section - Grove gear installation Steve

Hi Bill, 0.31” X0.5”stainless strap. take the edges/corners off with emery cloth. The nutplate is a MS21055L3 two lug all metal corner anchor (AN3 bolt, don’t remember the length, but yours

Hi @ all, thanks for your comments and hints, after I spend two weekends to listen all Q-News letters and looks around for a solution that cover that issue. Currently the solution that Terry indicate

Jay, In looking at the photo's & the data sheets for the nut plates, I'm wondering what size of stainless steel strap & nut plate did you use in your final version? Bill Higdon

Hi Eugen, When I built my wing I leveled 4 saw horses all is the same plane and bonded them to the floor. I built a table on top of them with hinges on one side. Hinges pins must all line up. Leveled

Yes it is the way to do this.. in the factory settings these types of tools are named "strongbacks". A stable frame of some kind to maintain the wing in construction or during moves to final join.

Eugen  I made four sets of adjustable jigs.  While the wing is in the jig I bondod the  slotted plywood to the wing.  The other pieces of plywood are installed with two bolts in the slots for

Get two of these or make your own from wood or metal. It looks like they're just trying to get gravity to work with you instead of against. If you can fixture, clamp, and vacuum bag well enough, I

Hello Q-Community, Im on my way to build the main wing, please find in the attachment picture from ailerons slot with 1 bid 45° with some peelply on the top. Additional to that it´s necessary to