You could use two cables and six pulleys I think. Take one cable and run forward from one side's slide beyond most forward postion , turn 90 degrees over to the other side, turn aft and back to

KingDWS@... writes: I dint say you should DO it, wise guy, I only said I've flown behind them. I'm just makin' a theoretical estimation you unnerstand.

inside of the tire. I don't know whether that's good or bad. I let the tire wear on one side, then turn them around and wear the other side. I am getting about 175-200 hours per set of tires. I should

J'ever notice that Malechek is a little fussy about his sliding canopy, Mr B. ? If someone is not careful and he gets a little racking, the sliders can come off track. To stop the racking one has to

Since Jim says you can put something other than a Onan in my Q1 Kit, I'll take a step to the middle and say "FOLLOW THE PLANS" Happy New Years EveryOne Dave K

Since 2001 wasn't a good year for aviation, I spent the last day of the year, exercising our freedom to fly. Other than being cold (18 degrees F), it was a beautifully clear day with 30-50 miles of

You know I'm really rather picky on what engine I'll let you put on MY kit ;-] Depending on what engine you have to start with you can get an easy 35 hp out of them. The Kohler has a 100 extra cc's

I have an Onan, firewall forward with prop, cowling and motor mounts for sale including the prop. It was last flown about 8 years ago. Stored indoors in a heated space but not pickled. $300 +

Leon, has your project flown at all? If not, you might want to consider reducing the variables somewhat by either purchasing an Onan firewall forward package( they are not exactly a sought after

Having flown behind a so-called Onan 22hp, a Global and a Rotax, I think that 35 horses would be just about right for a Quickie. Seems like the 503's are excessive and need to be restrained by prop

Nuff said.

writes: Actually I think it's Leeon. They do some funky things out in west Texas.

Hi Chris W Thanks for your input. I've never seen a pair of ice skates in my life, let alone a frozen lake. I drove past a lake in our south island once, that sometimes freezes over,

jtenhave@... writes: This is something I will NEVER know - but I should try a bit harder on the anorexic part<G> I didn't know that Leon (strange name) Davis had been

I'm planning on picking up my new project next weekend and would kind of like to have it flying about the same time that my brother gets his Tri-Q in the air. I have not yet decided on the "proper"

As a reference point; a '60s style big American car required about 20 horsepower to maintain 60 mph on a level straightaway, no wind. This is first hand information. I made the measurements

Thanks Dave, BTW, a couple of summers ago I flew in Tom Moore's Q200 and Bob Malecheck's Q200. Tom has the fwd hinged canopy and Bob has the sliding canopy. I was going to go with the fwd hinged

My experience with the Posa leads me to the following comments regarding your situation. 1. Disconnect your linkage from the carburetor slide and see if it is actually closing all the way. It will

Neil Jepsen-------- I had built my little Quickie per plans and then stuffed the 503 Rotax in the front end. I increased the gross to 600 lbs and this gave me quit a bit on - camber. I flew it

Mike Perry wrote: Do you need it? No! Is is nice to have? You bet! Cuts the landing float down considerably if you are a little fast. It also permts a steeper approach down final with better view