main@Q-List.groups.io

Are they out? They're here in Ca, 805-646-6042. Aviation Products inc. On Tuesday, May 3, 2022, 01:50:17 PM PDT,

By Stan Susman <stanpfa@...> · #54517 ·

https://www.aircraftspruce.com/pages/ep/fuelsender/westfuelqty2.php -----------------------------------------From: "Richard Thomson" To: main@Q-List.groups.io Cc: Sent: Friday May 6 2022

By Martin Skiby · #54516 ·

Re: O-200 Engine Mounts?

Let me correct that last. Robert, I was not being coy on this. Yes they are hard to find and I just happen to have most all the hardware for my kit. I would not be willing to part with them without

By Martin Skiby · #54515 ·

Re: Fuel Probe for Main Tank

The one we used on the triQ years ago was from Sport flight and was a capacitance probe. Just cut to length and installed in the tank just in front of the panel. Worked

By Martin Skiby · #54514 ·

Re: O-200 Engine Mounts?

You mean these here in the box? If you buy my project you are welcome to them as well as the exhaust, baffling, counter weight arms, rudder pedals and much much

By Martin Skiby · #54513 ·

Re: O-200 Engine Mounts?

I seem to be striking out on existing O-200 engine mounts. Anyone has plans and specs to have new ones fabricated please? Thanks Robert -- Robert "TheFrisco" Schmid (408)

By Robert Schmid · #54512 ·

Re: Fuel Probe for Main Tank

Funny, I was just looking at fuel sensors and which one to put into my tank. Have a good flight! -- Robert "TheFrisco" Schmid (408)

By Robert Schmid · #54511 ·

Re: Fuel Probe for Main Tank

Its 11 00 in the morning here sunrise has well departed. :-) Thats a good quality sender, provided you make sure the casing is bonded electrically its a simple two wire ohmic output.

By Richard Thomson · #54510 ·

Re: Fuel Probe for Main Tank

Thanks…departing just after sunrise to make sure I can see every hill. I believe it is very similar to this one: https://kus-usa.com/product/sss-ssl-sender/ -- Corbin N121CG

By Corbin <c_geiser@...> · #54509 ·

Re: Fuel Probe for Main Tank

Hi Corbin, Well is it a float one or a Capacitive one ? What instrument did it feed before ? Lucky man, the Pilatus is a great aircraft. Watch those hills !!

By Richard Thomson · #54508 ·

Re: Revmaster rebuild

Michael are you saying to use the Mofoco heads (55cc chamber) plus a 3mm copper washer? That would add close to 20cc. But it looks like the Revmaster heads are just 58cc. Now im wondering what the

By Troy Zawlacki · #54507 ·

Fuel Probe for Main Tank

I am not sure which fuel probe I have in my main tank. I am needing to configure it with the new avionics so I was curious if there was a most common one used in most builds and I could try using

By Corbin <c_geiser@...> · #54506 ·

Re: Revmaster rebuild

They do not. Great Plains or Scott Casler will be happy to do that machining for you, if you wish. https://www.greatplainsas.com/0160-/-machine-work-only.aspx https://www.hummelengines.com/ If you

By Michael Dunning · #54505 ·

Re: RevMaster 4 Sale

I want it. 300 units newer than mine. Problem is getting it across the country. That will probably double the cost. Might be better to just ship it to RevMaster. The rusty crank case breather plate

By Anthony P · #54504 ·

Re: Revmaster rebuild

Hey Michael Do the Panchito heads have dual plug option?

By Mike Steinsland · #54503 ·

Re: Revmaster rebuild

Oh boy does this ever help. You've given me lots to consider! Thanks so much for putting this info together in one spot it's going to save a lot of digging.

By Mike Steinsland · #54502 ·

Re: Revmaster rebuild

Mike, Per your questions, I decided to add some things from a draft blog post and Revmaster accident/incident history I've had kicking around for ages; read as little or as much as you like. YMMV. A

By Michael Dunning · #54501 ·

Re: Matco Brake / Wheel Setup

FYI, Airheart has ceased production of their 150 series brakes. Get replacements while you can. Sam

By Sam Hoskins · #54500 ·

RevMaster 4 Sale

Selling the RevMaster that was on my rescue project, details & photos on the below FB marketplace post ... https://www.facebook.com/marketplace/item/568611404535068/ Text me or email me with an

By Robert Schmid · #54499 ·

Matco Brake / Wheel Setup

The Jim-Bob Six Pack talks about Matco brakes, my Airheart brakes are corroded to death ... Anyone done a conversion to Matco wheels/brakes? Any photos? Thanks Robert -- Robert "TheFrisco"

By Robert Schmid · #54498 ·

Messages