main@Q-List.groups.io

Re: AV30

Jim, Hope you don’t feel attacked bringing-up issue with your AV30’s. Your airplane is beautiful, and you’ve been flying it for a long time. These “real-life stories” really make the list

By Ben Wilson · #56091 ·

Re: AV30

I'm really interested Jim. I installed my AV-30 yesterday. It's been too windy to fly it, but everything seems to be working on the ground. I'm really looking forward to seeing it in action! Paul

By Paul Fisher · #56090 ·

Re: AV30

Good morning Guys, I called a friend at Uavionix yesterday and explained what was going on. He took charge of my problem right away, so hopefully I will have some news on this shortly. Andrew is the

By Jim Patillo · #56089 ·

Re: AV30

Hi Jim, I ran an early Dynon D10 EFIS for many years. It had an internal magnetometer and of course, Gyros. No GPS attached to it. The heading never precessed a bit. I wonder if the uAvionix is

By Mike Dwyer · #56088 ·

Re: AV30

I suspect it is a design and/or magnetometer-quality issue. They have decided to fit everything in a tight space, and with everything else that is going on in there electrically, it must be an

By Jay Scheevel · #56087 ·

Re: AV30

Jim, Isn't the precession problem inherent in any gyro-based compass/DG? ... though I suspect some gyros have less precession than others. Isn't installing an external magnetometer the right

By hgflier · #56086 ·

Re: CHECK IN

Keith apparently has been hacked again. Please don't answer. Sam

By Sam Hoskins · #56085 ·

CHECK IN

Hi, Sorry to bother you, Did you shop on Amazon? Thanks

By Keith Welsh · #56084 ·

CHECK IN

Hi, Sorry to bother you, Did you shop on Amazon? Thanks

By Keith Welsh · #56083 ·

Re: Prop Bolts?

I strongly recommend that you install the Belleville Springs specified here: http://www.cozybuilders.org/Prop_Bolt_Bellville_Washer/index.html

By David J. Gall · #56082 ·

Re: Prop Bolts?

Saber Manufacturing: https://www.sabermfg.com/bolts https://www.sabermfg.com/extensions -- Kevin

By Kevin R. Walsh · #56081 ·

Prop Bolts?

Best source for O-200 flange and prop bolts? Links to exact parts appreciated. Thanks Robert -- Robert "TheFrisco" Schmid (408)

By Robert Schmid · #56080 ·

Re: Q2

At Velocity we used a mixer gadget. Both cables from the panel come together side by side. A third cable attaches from the opposite direction. The three are secured with a bolt. The down-side is

By Rick Hole · #56079 ·

Re: Q2

How in the world did you rig for twin throttles/mixtures?

By Nick Wright · #56078 ·

Re: AV30

ATC gives you vectors in magnetic heading not GPS heading. So it renders the AV-30 DG undependable therefore useless. They advertise it as a DG and that's what I bought it for. I also had an issue

By Adam Radloff · #56077 ·

Re: AV30

Jim, Represent us as a group of angry owners. You have my permission to use my name. Sink your teeth in them! Thanks, Kevin

By Kevin Boddicker · #56076 ·

Re: AV30

Do you think it would help to put ferrite beads on coax and wiring coming out of different instruments? Maybe bring all of your wiring back to a big grounding block? Seemed to help mine long ago.

By Bruce Crain · #56075 ·

Re: AV30

Living in Honduras (where GA is practically non-existent) I don’t have much opportunity to stay current. I have not dealt with Uavonix but have installed and debugged other manufacturer’s gear.

By Rick Hole · #56074 ·

Re: AV30

Hey Rick and Kevin, you know they should be giving us the damn things (remote mag) for free. Have you tried working on Uavonix for something to be done about this. I’m about to. I have two AV30’s

By Jim Patillo · #56073 ·

Re: AV30

I too have one AV30 installed. Talked with the rep at OSH. She said if it precesses more than a few degrees in 15 minutes, a remote is needed. The reason cited was magnetic interference in the panel.

By Kevin Boddicker · #56072 ·

Messages