Robert, I use these and you might be able to make secret hole for the exit. Mike Neidenthal. N200 QK. ( you saw mine in LVK)

Robert How about just running wire from your battery location up to the baggage compartment where you can reach them, and cap the ends until needed, uncap then and clip on your charger. Sometimes I

Since my plane sat outsidevp before I rescued it, I am replacing the control cables. What type do I get? Stainless? Thanks Robert -- Robert "TheFrisco" Schmid (408)

No sorry that’s not what I meant. My problem is the battery is in the tail and so are the battery solenoids. I need a way to attach a charger to my battery without taking off the tail. -- Robert

Do I understand correctly that the tail will be attached with electrically activated latching?

I found a little flaw in my electrical design which is how to attach an external battery charger. I need some elegant way to run the battery lead outside in the tail. Any plug suggestions?--

Moo moo cow smell. My you tube channel https://www.youtube.com/channel/UCr3x6bkHUw1UUQ96ATcRFfg

Robert------------  I built the same as the plans like Tim referenced to, but I made a bit longer FC2 and drilled holes every 1/2 inch. This allows you precise adjustment for your rudder pedals. If

Tim, Are you sure you meant Moo or was that auto corrected ? :-) Rich T. On 03/02/2023 22:27, Tim wrote:

I did one per side, ‘quick’ is relative I guess as I found them a bit fiddly to do up, but it works.

Guess I should’ve said some people use a bell crank (like me)… Others just put a disconnect in each side’s cable. That’s simpler and lighter. I’m sure someone with that setup will send you

Most people have some sort of bell crank mounted in the tail cone. Here’s a detail of mine outer holes are where the cables going forward to the rudder pedals mount with a thimble/shackle and an AN3

I have found ways for electrical disconnect at the tail seam but what about rudder cables? How have you all solved that? Do the pedal connectors come off for a quick connection at the tail seam? --

Hi Norman, Sorry it’s a bit late, I got some normal foam sheets and some of the energy absorbing stuff for the base and tried it out, various thicknesses, to fit. Then had leather covers made.

A major milestone Robert. Congratulations! At your pace, you will be in the air in no time. Troy now has his Q back back at the LVK airport after replacing both tanks. He is beginning the taxi

Excellent Mike! Beautiful pic! Bruce

Way to go. And what an incredible pase!

Well done Robert. Looking good. Get Outlook for iOS

Great Picture Mike, Reminds me of the flight we did in 2002 but without the ride of the Valkyries playing as we headed to the strip. Thanks for sharing, fly safe. Rich

Well done Robert, great news. Flying next week ? Rich T On 03/02/2023 02:09, Robert Schmid wrote: