main@Q-List.groups.io

Re: News Release

Outdamnstanding JP!

By JAMES MASAL · #76 ·

Re: News Release

Congradulations Jim!!! Great report Keep us informed on future flights and enjoy your Q! Doug "Hawkeye" Humble Omaha NE

By HawkiDoug@... · #75 ·

Re: Dynamic Balancing

I paid my guy $100.00 the first time. I suspect subsequent sessions may cost less. Jon

By Jon Finley <finley@...> · #72 ·

Re: Dynamic Balancing

What would be the "non-friend" price?

By Dennis Clark <dclark3@...> · #71 ·

Re: Dynamic Balancing

I just balanced my DDT Subaru yesterday in about an hour including setup. I have some friends at an aircraft place that let me use theirs. Only problem I found was that I would get erratic readings

By DKeats/CWalterson <dkeats@...> · #70 ·

Re: Dynamic Balancing

HiBruce, I hadmy Soob dynamically balanced. Worked just like Larry described and is veryeasy and pain free. It took us about 8 engine runs and ended up with acouple of grams on my spinner

By Jon Finley <finley@...> · #69 ·

Re: Dynamic Balancing

Bruce J Crain wrote: As far as I'm concerned, it's an absolute must. We have a local guy around here that even makes it an EAA chapter (meeting) event. I'm in the process of statically balancing my

By Pat Panzera <panzera@...> · #68 ·

Re: Dynamic Balancing

Bruce I had this done at a fly-in. The guy attached a motion sensor to the front of the engine (we removed on of the case bolts and installed the sensor there) and a sensor to tell engine rotation

By L Koutz <koutzl@...> · #67 ·

Re: Dragonfly for sale

If I was willing to spend 7 grand on an engine, I would look very hard at the Jabiru and maybe spend a bit more for it. The weight is not much more than the HKS. And it doesn't turn 7000

By Dennis Clark <dclark3@...> · #66 ·

Just Do It

Well, I finally worked up the guts (and hada couple of free hours due to cancelled tours at the museum) and stuck my rightwheelpant back on. It was a lot worse to think about than to do. Now all I

By Michael D. Callahan <micallahan@...> · #64 ·

Dynamic Balancing

To the "Groupies", I have had a slight vibration in my Q200 since it was completed. I am very particular about my "bird". I have been in touch with a company that does "dynamic balancing" of the

By Bruce Crain · #65 ·

Re: Dragonfly for sale

The HKS 700 would probably work great if you can afford it. They should really call it the HK$7000. The 503 really transforms the Q1.

By Ted VanMeter <tvanmeter@...> · #63 ·

Re: Engine Replacement

Dave Richardson wrote: If I were building from scratch, perhaps. But since it's already installed, no way. :) Pat

By Pat Panzera <panzera@...> · #61 ·

Re: Dragonfly for sale

Where can I obtain information regarding conversion of a Q1 to a Rotax 503? Is there any literature available, especially anthing regarding performance capabilities with this engine. Also, would any

By Jordan Funk <jordan@...> · #60 ·

Re: Engine Replacement

Are you thinking about making your header tank larger since you don't need the room for the mag box?

By Dave Richardson <dave@...> · #59 ·

Engine Replacement

By the way, I've started on the engine mount and have confirmed that only the ring gear and the starter's snout has to be recessed into the firewall. So the "mag box" is going to be about 1.5" deep,

By Pat Panzera <panzera@...> · #58 ·

Re: Aerobatics

Maybe I was being a little generous when I said hammerhead. He said he would dive it for speed at full throttle and then pull up and kick the rudder with just enough speed and thrust to get the nose

By Ted VanMeter <tvanmeter@...> · #57 ·

Re: Engine Replacement

In a message dated 8/11/00 1:12:36 PM Central Daylight Time, panzera@... writes: << Are you thinking about making your header tank > larger since you don't need the room for the mag >

By HawkiDoug@... · #62 ·

Dragonfly for sale

By the way... It's still for sale: http://www.angelfire.com/ca2/Dragonfly/ForSale.html Pat

By Patrick Panzera <panzera@...> · #56 ·

Re: Aerobatics

With a Onan??? Its comments like this that make me realize just how perfectly, normally boringly, middle of the line sane I am, (when I rem to take my meds). Your friend have an idea of his roll

By Dave King <KingDWS@...> · #55 ·

Messages