Thanks for the reply, will answer each paragraph Ron Triano South Lake Tahoe, CA The Sonerai is finished and flying finishing the

Ron, C-Rod may take a stab at this, but here’s my 2 cents worth. The mixture shaft is pinned into alignment with a little “e” shaped wire device that is trapped in the mixture arm. As long as

Ron, The shaft for the mixture control is flexible down in the carb. I don't know if it would be possible for this to have gotten twisted or not.....one consideration. Also, I assume the control lever

Professor Charlie, if you still monitor this list I have a question on a MA3. The shaft for the mixture has a ½ slot cut out of the bottom that shuts off the fuel on the lean side. However on the

Where is Damian. Haven't heard anything from him. Ron Triano N91RT Sonerai IIs, is a bird, it really flies Q200, Back working on it, soon to be flying

works Ron Triano N91RT Sonerai IIs, is a bird, it really flies Q200, Back working on it, soon to be flying

Please advise if this has been posted before. (more trouble with Yahoo Groups) Subject: JOHN TENHAVE Are you out there John? I would like to talk about the Tenhave Tailspring. The old

Hi Guys, Does anyone have a spare upgraded rudder yoke / welded post assembly ? Or does anyone have the drawing for one please ? It for my Tri Q and its the wider one I need ( it has the bolt on

Several weeks back, I requested comments from the list on the canard root farings. See the results at http://www.corvairq.info/Canard%20fairing.htm Thanks again for your comments. Joseph Snow

Are you out there John? I would like to talk about the Tenhave Tailspring. The old address is not working. Cheers, Peter

Ron, it is silent, I have never heard it. But I need your offline email address to send the pic. Peter _____ From: Q-LIST@... [mailto:Q-LIST@...] On Behalf Of Ron

Sorry Peter I forgot to add the email. rondefly@... Ron Triano N91RT Sonerai IIs, is a bird, it really flies Q200, Back working on it, soon to be flying

Thanks Peter, I would love to see a picture of the wheel. Is it quiet or just as noisy as the hard type? Ron Triano N91RT Sonerai IIs, is a bird, it really flies Q200, Back working on it,

Ron, Yes I saw the pic showing the underside of the wheel pant and looks like an axle inside. My axle is just a piece of 4130 straight tube and my brake calipers mount on the wheel pant side. I will

Peter, I will answer your paragraph. Ron Triano N91RT Sonerai IIs, is a bird, it really flies Q200, Back working on it, soon to be flying

Ron Thanks for the link. It is looking great, especially the wheel pants shape and the graphics. Re the adjustable alignment how do you manage the brake pad assembly so it aligns with the disc in a

Peter, Here is the web address to my first Q page, it has some pictures of how I attached the axle. The written post I sent gives a bit more detail, The side has to be attached to the spar both top

Peter, I have the tailwheel turning axis vertical ok but where did you get a pneumatic tire? I tried all over to get a 4" one. Did you go to a 6" tire? Ron Ron Triano South Lake Tahoe,

Hi Peter, I will insert the answers I have at my computer here in the workplace. Will be home tomorrow evening and can then look up any photos you also want. Ron Triano South Lake Tahoe, CA The

Hi Peter I have heard good things about that tail spring, were can I purchase it and do you know the price? I would like to put one on my Q2. Thank you Raoul --- peterjfharris@...