I suspect I am going to risk the good favour of you all, by asking so many questions on topics long ago discussed and no doubt put to rest and beg your indulgence for being a pain in the bum. I built

Having yet to attach the nose wheel to my Tri-Q and having been out of the loop for many years, I am interested to know more about what the problem is with the old one and what the fix is, and cost

3 months ago young Mike Dwyer wrote to me about refinishing when I first started work on FN, and the phenomenon of the expanding peeling process, and of course he was right, to some extent at least.

I am currently looking for a replacement rudder pivot post and arm welded assembly for the Tri Q, which I think is part number Q2CSA10, ( that may be the old Q2 short moment version number ) If anyone

Hi all This year Santa decided that I could do with an uprated nose leg to replace the 20 year old one on my Tri Q, and it arrived yesterday. Many thanks to Scott Swing and co at Velocity, and Dave R

Does anyone out there have a forged crank for an R2100? Also, is anone interested ina new Rotax 583 with a B gearbox. Thanks Tom

Found an O200 hey Dave? Kevin Boddicker Tri Q 200 N7868B 37.3hours Luana, IA.

While we're on Prop Extensions, I have a 6" SAE 1 off an O-200 for sale. I also need a 5" SAE 1 that's 5.5" on the engine side. Dave Richardson Tri-Q2(for now) Stow, OH

I have a 3 inch extension that I used on my plane that is in good condition that I would sell for $50 plus shipping. Jim Doyle

Peter, Thanks for the Queensland Christmas present. My wife is from Bermuda so we both appreciated it very much, as BAZ lives there as well. Is he just as noisy in Queensland, especially late at

I just happen to have a new one that I'll probably never get around to using. It's a bit shop-worn and a little weathered, but otherwise in new condition. It's a 3" extension that measures 5-3/8"

Don't know if this the only place. I found them in ACS&S catalog 2006-2007 page 180. Kevin

I believe this is the one and only place. Very high quality. http://www.geocities.com/sabermfg/ _____ From: Q-LIST@... [mailto:Q-LIST@...] On Behalf Of David

Need an extension for my TriQ-200. Anyone have one to sell? Who makes them? David Posey

Lynn French has a Q2/200 kit for sale at the QBA web site. He also has a link to other items for sale. Check it out! https://plus2.safe-order.net/quickiebuilders//forsale.html Doug "Hawkeye"

With that much contact area and a likelihood of the two parts being flexed about, any good contact cement would probably do. But try Eastwood catalog # 31087 No Weld Panel Adhesive Replacement.

Thanks - so she looked after students at Southern Illinois University. AF

Good job SIU! Sammy you will have to offer her a ride in a real aircraft when you get the chance! Bruce ________________________________________________________________________ Try Juno Platinum

Sweeeeeeeeeeeet!!!!!! You're gonna' love it! Now get Paul Buckley from Cheshire to finish his and you will have a formation "wing nut". Bruce

Thanks guys - it's a good feeling. Looking forward to my turn. Not many details about the flight because there was no "supporting engineer" to make notes. I expect to be aboard next time for the