Sorry I didn't catch this before now. If you're having trouble using the Quickie Wiki shoot me an e-mail and I'll see if I can help. I think it could be a good resource. However I'm new to the

Hi Phil, that sound like a hell of a good price to me, let me know when you done, I will take a set Thank you Raoul --- britmcman@... wrote: From: britmcman@... To:

Hello Rene: You can send the autocad file directly to me at britmcman "at" aol "dot" com. I will see if I can figure a cost effective way to make a slew of these and then make them available for

Hi Michel, Good to hear from you. I'll put you on the list. Look forward to seeing you in December. John, Allan, and Raoul on the list as well. Phil, I have done an autocad drawing of the VG that

Hi All, You all have been a great help. I am looking for pictures and information on building a plenum for my Revmaster. Where can I find this? Thanks, Tim Bryant State College PA Q-2 revmaster 65

Ren, If you go into production I will be interested by a set too. Hope to see you in YXX in December. MM C-GQTU

I`m in too. John Packer C-GJHP

________________________________________________________________________ Try Juno Platinum for Free! Then, only $9.95/month! Unlimited Internet Access with 1GB of Email Storage. Visit

Me too if pos. Allan F

Chris, True, these are similar to the original style I had, but....................THEY ARE NOT THE VOYAGER STYLE VG's. They'll work fine if applied as per the QAC layout. They will also cost you

Guys-------- If you need great VGs, there is a company called CCI and they make a set for less than 100 bucks I think. I have some on my Dragonfly and my Super Quickie. Look good, work great and take

In a message dated 11/6/2006 10:30:10 PM Mountain Standard Time, britmcman@... writes: One Sky Dog: That is just about the best response or feedback I have had on the subject. I truly

Hi Rene. Let me know when you are ready to make more of these VG'S, I would like a set for my Q2 if you don't mind and if it's OK with Mark Sommers. Thank you Raoul --- q2robertson@...

Allan, Yes, I have the "Gall" wheel alignment, Aircraft Spruce 6" homebuilders tailwheel and a steel tail spring. Still have the single lever original brake system. Rene Q2 C-FBWV

Hi Phil, I had 3 sets made up for us here at Abbotsford. I could have more sets made up for others, but would have to check with Mark Summers first. I had them laser cut out of 0.030" aluminum. I

Hello Rene: I work at a sheet metal company and we have punch presses, brake presses and an EDM so the making isn't much of a problem if I can get the design data. Cheers, Phil Lankford

Thanks for that Rene it's good to know that you like the t-tail, is it controlled by cables? Do you have other mods - wheel alignment, toe brakes, tailwheel, etc.? Regards Allan F Q2 Rev

I doubt it, these are usually called Hall Vortex generators. http://www.hallwindmeter.com/vortex.php <http://www.hallwindmeter.com/vortex.php> Ryan

Interlux Brightside one part polyurethane, easy application, high gloss, excellent flow and leveling characteristics as well as incredible abrasion and chemical resistance. Brightside also takes

Nate's VG's are easy to make. http://groups.yahoo.com/group/Q-LIST/files/Nates%20Vg%27s/ <http://groups.yahoo.com/group/Q-LIST/files/Nates%20Vg%27s/> Ryan others like to