Rick, Our private addresses are openly displayed by MS Outlook messages inbox, and also when you open each file, but they are not displayed when you click on the tool bar to make a reply just when

AGAIN APOLOGIES IF YOU HAVE SEEN THIS BEFORE. ON MS OUTLOOK I HAVE NOT. Jon I am surprised that you would take offense at my remark which was intended to lighten up a rather boring subject. I

Hi Dave, I believe Richard is onto something. I did away with my cowl flap and built an extactor type exit as can be seen in my article in issue 117. I didn't see any speed increase but did notice a

Click on "properties" and the private address is there for all to see. Allan F

Allan, Certainly add the VG's before the first flight. In fact I've flown my Q2 for the last 8 years with VG's and this summer was the first time I'd ever flown it without. Dr. Steve wouldn't let

One Sky Dog: That is just about the best response or feedback I have had on the subject. I truly respect your point of view. Thanks, Phil

Are Nate's VG design same as that used by Mark Summers and Rene? Phil

Not displaying our email addresses is a Yahoo choice, and probably a very good one. I get plenty enough SPAM mail already without having my address posted on web sites. If you want to include your

I was wondering whether to add VG's before my first flight, now I'm convinced - I will. Regards Allan Farr Q2 P.S. I also have a T Tail, are you happy with yours or would you sooner have a reflexor?

Hello Rene: Did you make any additional VG sets to be made available for those others who may desire a set? Any information would be appreciated. I would like to buy or build a set for my Q2.

Hi Jim, Could you or Bob Farnam please get this message to Mark Summers since I know he does not monitor this list. As you know I had the QAC recommended VG's on my Q2 ever since I've been flying it.

You need to put on a sanding primer if you haven't already done that. I'd recommend a catalyzed urethane primer. When it's sanded to 320 or 400 grit and all nice and level, shoot a coat of epoxy

Thanks Mike I found it. ! It's there when I open the file but disappears when I make a reply. Bill Gates need a kickinthenuts. Peter _____ From: Q-LIST@...

I was planning to also use a 2-part Polyurethane but after talking to Ken Miller on the canard-aviators list he recommended an acrylic urethane for ease of repair. He suggested that it is difficult to

There are many different E-mail programs with different ways of opening the full text including routing headers. Here are some ideas: -- Double click the document title in the "inbox" listing. --

The "free " version often has advertising but in this case they are running it to get rid of problems. But it is a lot more megabytes to swallow. Peter. _____ From: Q-LIST@...

The thing I did not like about Eudora is the advertising on the free program. I have not used it for a few years so it may be better now . Except for the advertising I like it a lot better than

Hi Guys, I am at the point where I need to put primer and top coat on the TriQ. I had been looking at using 2 pack polyurethane with epoxy primer. But before I go down that road, what is everyone else

Dave, Since many of the original kits were upgraded to Q-200's, I think it would not be hard to find an available cowling on this list. Sam

Doug, Put "Eudora" in your web search field, it will find it. (Check your spelling) My preference is Mozilla Thunderbird as a better replacement for MS Outlook. It is free. If you don't like it