Anyone here read German? If so, is the word "vertical" in the English translation below a correct interpretation of the meaning of the original German text? 5.3 Bei Propellern ohne Paßzapfen oder

Hey Ron, I thought you did NOT want a wood prop. The MT prop is wood.... David J. Gall

Keith, I too want to say thanks for hosting the flyin. Between graduations Friday PM and the kids calling to say they were hit by a deer, our time there was limited. Seeing you Quickie up close made

---Hey Earnest,I've heard really scarry things about that MT Prop! You should send it to me, I'll check it out for you! Don't fret, I'll send you a Warp Drive to keep you going. Remember, it's only

Leon, Why do you always send me scrambling for the books??! :) David J. Gall David; With the offset thrust line (I assume a belt reduction with the 2/1 ratio rather than planetary) is is

Nice job Dan! Doug "Hawkeye" Humble www.asignabove.net Omaha NE N25974

Earnest, Could it be a bad translation from the German? I checked the installation instructions on the MT-props website and I could find no reference such as you describe for their fixed-pitch

-Thanks Jon, Any info helps! Ron-- In Q-LIST@..., "Jon Finley" <jon@...> wrote: for prop the for Currently, back it less run wood

-Thanks Jon, Any info helps! Ron-- In Q-LIST@..., "Jon Finley" <jon@...> wrote: for prop the for Currently, back it less run wood

Dan, Nice job putting all of this together. Looks like a lot of time and work. Steve Ham

I fixed the Q2 plans posted on my blog so that they were easier to navigate and search. The "Table of Contents" now has links to the start of each of the 20 chapters, and I added "next - previous -

Ron Weiss wrote: "...because all the info I can get is that some reduction units don't like 2 bladed wood props(harmonic issues). One guy used a Prince and liked the performance, but, there

David, I have a 2 blade electric constant speed MT. Earnest

Hey Jon Finley, nice to hear from you! I sent an email to you off list and it got bounced as I thought it might. Please email me off list at HawkiDoug@... if you would please. Doug "Hawkeye"

Keith, Would you give us a complete description of your Q1's demo flight ? Ryan experience all they came for and no one left disappointed. And that is always the primary objective. Heck I even gave

David; With the offset thrust line (I assume a belt reduction with the 2/1 ratio rather than planetary) is is possable that whirl mode resonance might also be a problem and contribute to prop flutter

Hi Ron, Afraid I don't check messages here very often so missed your call for help. Yes, I am in the middle of moving to an airpark (Yippee!!!) near Albuquerque, NM so my site is down. As you have

David, I have always mounted my props as you describe until I got my MT. MT installation instructions specifically state that the prop is to be mounted vertically at TDC. Any idea why they do

Thanks Jeff for coming: Glad you enjoyed yourself and liked the burgers. Kinda sweated that one at first, glad everyone liked em. I received several compliments so I guess I'll fix them again. One