Great story Mike, Hey did you install a Dynon in your panel??? If so can you post pics. Thanks, Steve Ham

If anybody has a use for my old 4 into 1 Q200 exhaust pipes, just make it worth my time to box and ship to you. They only have 150,000 miles on them and are good for many more! For others it is

I am not sure what to think of the T-tail concept. It just seems like a lot of extra drag out there in the airflow. It also seems capable of delivering too much power and could cause someone to

Will do - thanks. AF

Charlie, The flyin is on April 28th not the 22nd. Regards, Sam

Thanks for that Peter, I'm hoping my T tail will do the job of a reflexor - just want to get it flying. Regards Allan F

Hi. The wheel alignment's done, but I have the T tail rather than reflexor - will see how it goes. Regards Allan F

Allan we don't get to hear much about the T tail and I am curious to know how it goes. It should have the effect to reduce the load on the canard, like the reflex. I would suggest that you be sure to

Great Jim, then I will plan on using the gold strike one for myself and just keep the other room till the last minute in case someone needs it. Ron

Ron, I went ahead and booked at Gold Strike Casino. I will not be needing the room after all but thanks anyway. I would have sent this offline but don't have your e-mail address. Regards, Jim

In a message dated 3/17/2006 9:59:55 PM Mountain Standard Time, skittle@... writes: Charlie, The flyin is on April 28th not the 22nd. Regards, Sam oops, I better re schedual.

In a message dated 3/17/2006 4:43:30 PM Mountain Standard Time, rondefly@... writes: Jim, I checked and the reservations are at the Gold Strike and Nevada Landing Ron

Most of you already know that for the past few years I've been piggy-backing the CONTACT! Magazine fly-in off of the Mountain State fly-in. That being the case, I have a website set up announcing our

Allan, We solved the ground handling problems 5 years ago. If you want to get on with it and finish your plane,(previosuly discussed many, many, many times on this site)do a Gall Wheel Alignment,

Thanks Ron let me know as soon as you can on the hotel and I will take it. I need to let Bob F know so he and Alan knows where we are staying and has some options also. Regards, Jim

Doug I just posted the best pictures I have of them. You can find them here: http://www.quickheads.com/danyager/ Let me know if this is any help. Cheers, Dan my digital Sheehan. in

My take on the "master orifice" is that's it's a lawyer thing or a mandate from an overly anal Q.C. type. We managed to stumble around just fine for a long time without such a thing. About the only

Alan my cables are direct original and I am happy with that. My weldment is an improvement on the original as the pivot is vertical , that was one of the Q2 mods and by inspection I would say it is an

Jim, I checked and the reservations are at the Gold Strike and Nevada Landing Ron Triano http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page10.html _____ From:

Yes Jim, I made reservations at both the casino's in Jean and I only need one. You are welcome to the extra one. When I get there I will see which one has the dancing girls and you can have the other