|
Re: Spring Fling
I made it home safely as well. I liked the 30 knot tailwind (yes, TAILWIND!), but there was a nasty thunderstorm 20 miles beyond my destination, so I'm glad I didn't have to go any further!!
Great
I made it home safely as well. I liked the 30 knot tailwind (yes, TAILWIND!), but there was a nasty thunderstorm 20 miles beyond my destination, so I'm glad I didn't have to go any further!!
Great
|
By
Paul Fisher
·
#49703
·
|
|
Spring Fling
Thank you Kevin for a fun Spring Fling! Honey Lamb and I made it home with 35 mph head winds almost all the way home! The hanger at home was 104 degrees! For the trip up to Decorah we had 175+
Thank you Kevin for a fun Spring Fling! Honey Lamb and I made it home with 35 mph head winds almost all the way home! The hanger at home was 104 degrees! For the trip up to Decorah we had 175+
|
By
Bruce Crain
·
#49702
·
|
|
Re: Q-2 construction
To all:
Wow, thanks for all the input. I especially liked the reference to the Marshall Tail Cradle. I ended up strapping a cargo carrier to the longerons with ratchet clamps, and hoisted it up to
To all:
Wow, thanks for all the input. I especially liked the reference to the Marshall Tail Cradle. I ended up strapping a cargo carrier to the longerons with ratchet clamps, and hoisted it up to
|
By
John Lewis
·
#49701
·
|
|
Re: Selling Q2
No N number was given to me, but it must have had one, someone from Blackhawk technical must know.
No N number was given to me, but it must have had one, someone from Blackhawk technical must know.
|
By
Mark Palazzo
·
#49700
·
|
|
Re: Selling Q2
That's a fairly rare bird; Revmaster Q2 with a smile inlet and the carbon spar LS canard. Do you happen to know the old N number?
--
-MD
#2827 (still thinking about planning on visualizing how to
That's a fairly rare bird; Revmaster Q2 with a smile inlet and the carbon spar LS canard. Do you happen to know the old N number?
--
-MD
#2827 (still thinking about planning on visualizing how to
|
By
Michael Dunning
·
#49699
·
|
|
Re: Q-2 construction
Here ya go!
Q-talk 99 - Simple Tool Big Help
There's another one where John Loram used a bag of cedar chips to get the job done. Sadly, the photos are now missing... Still good tips on moving one
Here ya go!
Q-talk 99 - Simple Tool Big Help
There's another one where John Loram used a bag of cedar chips to get the job done. Sadly, the photos are now missing... Still good tips on moving one
|
By
Michael Dunning
·
#49698
·
|
|
Re: Spring Fling!
Well my return from spring fling went well
3 hours at 145mph smooth air and small head wind back to Ohio..
Mark
Well my return from spring fling went well
3 hours at 145mph smooth air and small head wind back to Ohio..
Mark
|
By
allen relseg
·
#49697
·
|
|
Re: Q-2 construction
Somewhere… probably old newsletters… someone used some “half circles” made of plywood and secured to the firewall. The half circles were large – extended all the way to ground whilst sitting
Somewhere… probably old newsletters… someone used some “half circles” made of plywood and secured to the firewall. The half circles were large – extended all the way to ground whilst sitting
|
By
Jon Finley
·
#49696
·
|
|
Re: Spring Fling!
Looking good. I’m trying to become a flying TriQ member of this group. I’ll let you know how it goes. --
Jon Swenson
Looking good. I’m trying to become a flying TriQ member of this group. I’ll let you know how it goes. --
Jon Swenson
|
By
Jon Swenson
·
#49695
·
|
|
Re: Spring Fling!
Great picture. I was hoping to get a flight or drive there. Too much going on.
Great picture. I was hoping to get a flight or drive there. Too much going on.
|
By
John Hoxie
·
#49694
·
|
|
Re: Spring Fling!
Great pic. Have a great weekend, just wish I was there.
Kevin – where is your hat?
Great pic. Have a great weekend, just wish I was there.
Kevin – where is your hat?
|
By
Lynn French
·
#49693
·
|
|
Re: Q-2 construction
I've done it myself with the tail section, engine & canopy all off and instro panel out. Be careful you don't sit it on your fuel vent box ram air tube, like I did if you have one.
I've done it myself with the tail section, engine & canopy all off and instro panel out. Be careful you don't sit it on your fuel vent box ram air tube, like I did if you have one.
|
By
John Hoxie
·
#49692
·
|
|
Re: Spring Fling!
I am going to try and go there tomorrow from Faith, SD (about 500 miles) in my RV-6. Sorry I do not have a Q, but wish I did. —Dan T.
I am going to try and go there tomorrow from Faith, SD (about 500 miles) in my RV-6. Sorry I do not have a Q, but wish I did. —Dan T.
|
By
Dan Thomas
·
#49691
·
|
|
Re: Spring Fling!
Great pic. Wishing I was there. Jerry
Great pic. Wishing I was there. Jerry
|
By
Jerry Marstall
·
#49690
·
|
|
Spring Fling!
Good turnout so far! Five Q's, a T-18 and a Cherokee. Fun time, and it's only Friday!
Paul Fisher
Q-200 N17PF
Good turnout so far! Five Q's, a T-18 and a Cherokee. Fun time, and it's only Friday!
Paul Fisher
Q-200 N17PF
|
By
Paul Fisher
·
#49689
·
|
|
Re: Q-2 construction
John,
Your plan will work but I would suggest finding 2 or 3 people to help you flip it. That way you have much better control than strapping it to a forklift and possibly damaging the fiberglass.
John,
Your plan will work but I would suggest finding 2 or 3 people to help you flip it. That way you have much better control than strapping it to a forklift and possibly damaging the fiberglass.
|
By
Jim Patillo
·
#49688
·
|
|
Q-2 construction
Greetings,
I am new to the group, but I could use some wisdom. My Q-2 is basically complete with wheels and brakes and all, but I need to work on the bottom. The engine is off. Any great ideas for
Greetings,
I am new to the group, but I could use some wisdom. My Q-2 is basically complete with wheels and brakes and all, but I need to work on the bottom. The engine is off. Any great ideas for
|
By
John Lewis
·
#49687
·
|
|
Re: Im Sorry, I Crashed my Q2
Good morning Joe,
I'm really sorry to hear about your accident/crash. You were very lucky to walk away from it. The Quickie is fairly forgiving (as opposed to a metal airplane), unless it flips and
Good morning Joe,
I'm really sorry to hear about your accident/crash. You were very lucky to walk away from it. The Quickie is fairly forgiving (as opposed to a metal airplane), unless it flips and
|
By
Jim Patillo
·
#49686
·
|
|
Re: Selling Q2
https://www.ebay.com/itm/264796827060
Corbin
--
Corbin
N33QR
https://www.ebay.com/itm/264796827060
Corbin
--
Corbin
N33QR
|
By
Corbin
·
#49685
·
|
|
Re: Selling Q2
Try this number in eBay search.
264796827060
It ends Wednesday 8:45 pm 7-22-2020
Try this number in eBay search.
264796827060
It ends Wednesday 8:45 pm 7-22-2020
|
By
Mark Palazzo
·
#49684
·
|