I will set my alarm clock..... nice idea.

Jay, I’m a Q200wannabe but have a sonex. Our group has been doing this for a while now. I was at my hangar with my I phone on my normal Verizon network and it works great. Just need some earbuds

Jay, You don't need wifi, just your smartphone, assuming you get a wireless signal. Today Kevin and I did a trial run with both of us on our phones and it was fine. I'd like to keep this live. Sam

Great idea guys. I am game to host one of these sometime down the road, but since I cannot get WiFi at my home field/hangar, would it be possible to share a video of the tour and discuss it

I like it. Great idea! Mike Q200 N3QP

Awesome idea!! Be there if I can. Scheduled for my IRA Written 9-11 ET. Brian

Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am, May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his

Thanks Phil. My data wire to the autopilot is connected to the TX pin on the HC-06 Bluetooth module and it connects to the Avare app fine.but no GPS data is received by the autopilot. This setup

I have a TruTrak Vizion385 in my RV6A. I set it up to accept two separate GPS sources (wired) through a selector switch. Source 1 is a line from my Garmin 250XL. Source 2 is iLevil AW3 and is also a

Thanks Paul. I saw that one but I didn't get much usable info from it. I'll be digging deeper into it though. Thank you. Dave

Hey Dave! I have not done what you want, but I did see something on the Avare forums about it: https://groups.google.com/forum/m/#!topic/apps4av-forum/zZuxa0EXEqw I don't know if that helps or not,

Hi there. I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and

Hi Eugen, I never used the green urethane foam. The fuselage shells were built using ¼” foam (rear shells) and 3/8” foam for the forward shells. They were made using vacuum bagging in female

Dear Q-List member, I just extended the list, please see the attachment. Best regards Eugen

Dear Q-List member, I´m on the way to investigate the requested foam material for build the aircraft parts. In the quickheads forum I catch that information below. It would be glad if somebody added

Too scary for me.

Hi Jerry, Found just what you need to accessorize your “flight bag” Cheers, Jay

Hi. I dont fly far without it. I started by trimming. I'm no longer the man I used to be. Have since developed a technique for avoidance of the fur. Another technique is to put it on and then trim

Hi Jerry! I have used the leg bag on long trips with other people in the cockpit than my wife. Saved my bacon! There is one thing that you might want to do before you use the external catheter.

Hello Q-List member, the design of fuselage is done so far, please find some picture below that Email (scroll down to end). The next step is to fit in bulkheads and Jig-level boards. I will send a new