Hey Jim, Looks you have a homing beacon inside that auto pilot of yours to go to and from work! Nice video Mike! We all long to do that flying stuff for sure! MikeQ200wannabe

Hey Mike, nice video. Does that thing float? Just askin😊. I remember one up in Canada seemed to do ok when it landed in a lake. I’ve flown throughout this entire Covid 19 thing and always under

Will do Jay. Jim N46JP Q200 Sent from Outer Space

Wow. it's been a while sense last flying. Our local airport closed RWY 9-27. I guess they didn't want to re-pave it. I kinda hated that runway anyway... But then they decided to pave the

One of my favorite photos Jim! Give my best to Bob F, next time to you see him. Cheers, Jay

Wilko. Jim N46JP Q200 Sent from Outer Space

Any Flights of 2 or more need to keep at least 6 feet apart! Mike Dwyer YouTube Videos: https://goo.gl/yKEHfK Q200 Website: http://goo.gl/V8IrJF

Speaking of maintenance, if anyone is bored enough to fly down/over to TKI (McKinney, Texas) and help me install a new fuel transfer pump, please know you are welcome to come. Corbin -- Corbin

It is such a relief to look at the belly and see a clean picture! Feels like a whole new airplane! Blessings on your engine maintenance! Bruce

Thanks Bruce, I’m gonna pull both top and bottom thru bolts first, then do one cylinder at time. 2 then 3. Those thru bolts go through both cylinders. I’m going to stroke the rod fully out, remove

Doh! Sorry Jim! I did find the thinnest o ring I could find to fit inside the hole but a chamfer would be a better idea. How will you make a chamfer with the thru bolt in place? Bruce

Sorry Bruce. Not to confuse everyone but I’m now referring to the #4 cylinder case bolt (half thru bolt you just repaired). Not the thru bolt did previous. Jim N46JP Q200 Sent from Outer Space

Hi Jim! Sorry it has been so long ago that I worked over the through bolt that I don't remember if I put an o ring or just used silk thread. Yes Buddy is a fun fellow to talk to! And when I have a

Sweet! We might have to rendezvous with Jay Scheevel somewhere 1/2 way there and come in 2 ship! Bruce

Speaking of the Fling, the virus and the gvmt will determine if it can happen. I won't give up until the last second. Also talked with Mike, aprt mgr, on Sunday. From a distance! He said that due to

Ouch! Broke off the tail? Contact me off list and I will see if I can take it off your hands.

I need to find a home for my Q-2 Tried to hang it from ceiling, broke off tail. Lots of parts. Near Chicago KDPA markpalazzo@...

Bruce, Thanks for the connection to Buddy. He is a hoot! I talked with Buddy at D&B Aviation in OkCity. He suggested a slight chamfer on the case where the thru bolt comes out of the case. He said

Hi Bruce, Glad to hear your great report. Keep knocking off those little to-do projects and you will not be able to stop smiling. About crosswinds: I have to admit that my visit to Enid last

I flew N96BJ today and can say that it is up and running without any problems. I have no oil on the belly after putting the o ring on the case half bolts on the left front! It was 75 degrees F today