According to this old Homebuilt Aircraft article, the 40th anniversary of the Q2 is coming up next year. Has anyone reached out to, or been contacted by, EAA about celebrating the occasion at Oshkosh?

You managed to beat a 12,000 knot headwind?!! N3QP is one hell of a bird! 😅 Thanks for the update Mike; your videos are a continued source of inspiration. -- -MD #2827 (still thinking about

Thanks

Thanks for contributing to the new list Mike! Great weekend.

Here is the first Flight Report on the new Group! For Veterans Day weekend we flew the Q200 from KPIE to Hilton Head SC, KHXD. We were invited up for a couple of nights by an old buddy of mine that

Q 1

Sam. Please include me on this list. jlbevila@...

Please add me to the list. Thanks Randy

Due to popular demand, in addition to the Q-List, we now have three sub-groups; Quickie-1, Tri-Q, and Q-Performance. Descriptions of each group below. When you post to one of these sub-groups, it will

I have seen cases where a headset connects ground of headphones with ground of microphone. Some radios can not tolerate this. With others it is not an issue. Rick Hole

That is what I was referring to when I mentioned ferrite filter. It arrives tomorrow and I will give it a try. The headset works fine in my other plane. Corbin Ge!ser

Not sure my link worked... At any rate, try snapping one of these on the end nearest the jacks: https://www.amazon.com/Ferrite-Noise-Filter-Cable-3-5mm/dp/B01N0AV746 -- -MD #2827 (still thinking

Thanks Rik....I will email him now. In the meantime, I may try a ferrite filter on the line. Corbin Ge!ser

I have QT as well and after the first year I stared to get a intermittent cutout in the mic and then I'd get a squelch pitch in the ear. Sent it back to QT, said there was a connector broke and he

Thanks Richard. Very helpful for future reference! Appreciate it, Corbin Ge!ser

Hi Corbin, I had just written this when your news came through, so thought I would send it anyway so it may give you ideas next time. Glad its sorted. To do a

Kevin and others, I went out today and started off by looking into the lead on the QT Halo, as Kevin mentioned below. Sure enough, as I move around the wire the tone/feedback comes and goes. I could

I get feedback in my headsets if I use Dave Clark.   Use Sigtronics and all is well. Something to do with the mic. Also, after thirty years of ear damage I finally installed the ANC kit into my

VERY interesting! Okay, so tomorrow I will start with headset troubleshooting since both times this happened it was with my QT Halo. I tried David and Clark one time but the QT was still plugged

Corbin, I have the same issue sometimes with my Halo headset and same radio. If I coil up the lead and place it under my shoulder harness it goes away. A while back with my Clarity Aloft headset the