Good job Sam. Maybe we can get him to take us in the really big hangar to show us that giant experimental that he works on. Cheers, Jay

Mike, Yes the gauges can be can be customized with arc limits as desired. Cheers, Jay

Hi Mike, Thanks. I will look to see if I can change that screen format. It’s called IFRR (I follow roads and rivers) Cheers, Jay

Hello Q Community, Thank you for your messages and tips. I have now implemented it according to the procedure from a Q-talk #9 from 1983, attached the link to it. Just Duck tape, micro, resin,

Jay, Does your video software let you add the color arcs on the ASI? Cool stuff. -- -MD #2827 (still thinking about planning on visualizing how to finish building)

Thanks for linking the plans page Michael, So, the plans called for the AN525-10R10 both forward and aft of the split line. I see that I used flat head screws for the front and buried them and use the

I stored it in my phone's calendar so it will beep at me! A hint for those that forget stuff like me! Fly Safe, Mike Dwyer Q200 YouTube Videos: https://www.youtube.com/user/FlyMeAirplane/videos Q200

Good video Jay. I got to try some time lapse now! Curious how many pictures a minute you were taking. Also, might want to pick a resolution that gets you a 16:9 screen? At first it looked like you

Too cold to get excited to work on my Q.... I think it'll warm up to 20 degrees today. Also having a hard time getting volunteers this time of year. When it warms up I'll be spending a lot of time at

Hi Anthony, Mitigate your risk!! Stay indoors! 😉 Also, please confirm - Dave D. has staff to remove the snow from in front of his hangar which contains an airplane without an engine?? Or, just

Very good Jay! You do have that bug look figured out! Only issue is that you were so high that I couldn't see the ground. 😥😉 Jon

This month's Q-Tour features Matthew Curcio. I met Matthew at Oshkosh a few years ago. He was living in Ohio and had just acquired a Q-200. He got the plane up and running and got a job at Scaled

nice videos Jay!

I should have taken a picture of the ice skating rink that I shoveled trying to get into Dave D's hangar this past week. :) Shovel had much more traction than I did. Good thing is, you only had a few

Don’t slip and fall Jon. That looks dangerous! 😉 BTW, I did another time lapse video yesterday. This one includes the landing in time lapse mode. Don’t blink or you will miss

We really got hammered with snow and cold this past week. I imagine many of you did too given that big weather system. I think I now understand what Paul, Kevin, and Jay were dealing with last month.

Reply all vs reply. Oops, disregard folks.

Hey Mike, I just got transferred to that unit at 2:00 in your video - last (pinkish) building on the left. I'll be flying UC-35 out of there. My quickie is still down for an engine swap, so I'll be

Can confirm the AN525-10R10 call-out; I had to order some last Fall and I made sure they fit upon receipt. Not tracking any washers; here's the plans page:

Agreed Sam. Those are the screws that I use as well. I too have used the nutplates called out in the plans. They too have been on for over 30 years. I think I replaced one of them years ago. You