Hi Eric, I think I am responsible for beating this topic to death in the past, so I will respond. Most, if not all of the successfully flying Tri-Q's are flying with a slightly higher incidence on

Hi Sam, I am planning on being there sometime late Tuesday or Wednesday AM depending on weather, etc. Will be flying the Cherokee, with my youngest son (16 years). Should be able to make the

Sam, What time and where is "Doug's get-together"? There are some forums I'd like to see on Thursday, but I also want to meet and talk to folks at a Quickie get-together. Thanks! Neal Andersen just

Good luck in the race this year Sammy! I think this will be your best showing yet! (Knock on wood!) ;-) Cheers, Dan Yager QBA Editor www.quickheads.com

It's been a few years since I've been there so I'm certainly looking forward to it.I plan to arrive Sunday and dept Wed or Thursday. -Captain Nate Peck This message was sent from the Sprint EVO 3D,

I'll be there Sam with my 21 years old son Jonathan. He thinks he's big enough for a round with his "dear old Dad" at Kelly's. I'll try to choke one down with him but I still haven't developed a

If anyone needs a room and/or ground support, let me know.

Hi Sam, Most if not all the canards at Davenport will be there. I am driving up Saturday and will bring the Quickie up later. Terry Crouch Quickie N14TC

Can't say I've heard anything about Oshkosh here, besides Doug's Thursday morning get-together. Who is bringing their Q-bird to Oshkosh? After all, they are having that big tribute to Burt R. I'll

Thanks for that link Jerry. Since I often cross the Truman MOA I'll have a better understanding of what I'm getting in to. Sam

Thanks Rene

Thanks for that correction -- Makes way better sense. Mike

The dry film thickness of the paint that did not allow UV to discolor the epoxy was 5 mils (0.005 inches) thick. We need to do a more controlled test to make sure of this number, but it looks like if

I have always been uncomfortable regarding MOA airspace. I received a notice from the FAA and probably everyone else did too but it introduces a new website www.seeandavoid.org which, if you take a

It's happening all over my 3 other yahoogroups as well Mark ( who is too tall to fit in a Q) said Maybe I should buy one anyway and stretch it, widen it and enlarge the canopy

Patrick and the Group, We are now starting the production of all the Tri-Q parts. Over the last month we took over the molds and other needed tooling for the Tri-Q gear from Scott Swing. We will be

My poor, bent landing gear.I'm attempting to bend them back into shape under heat and pressure. There is a chance we may not succeed, in which case I'll be in need of a replacement gear. Any help

I got the solution. SPF 30 sunscreen. Problem solved.Mike Q200Sent from my Windows Phone

That figure included 4 layers of infused 6oz fiberglass. I will need to get the actual number from Cal Poly Pomona. -- Larry Severson 18242 Peters Ct Fountain Valley, CA 92708 (714) 968-9852

Larry, you do realize that 0.2 inches, or 0.1969 to be precise, is nearly 1/4"??? (1/5th to be exact). Take one inch and divide it into five equal parts- that's 1/5th of an inch. I've NEVER seen that