Kevin, You are saying it is should be mounted on the left side of the mounting bracket? In the install manual, it is on the right side of the mounting bracket. -- Corbin N33QR

Great job Keith. I still haven't been able to redo my tour, but I will. Yours really came out nice and watching it gave me a few ideas. Thank you. Dave D

Corbin, The center of the sensor should be on the centerline of the engine as in the manual. Bracket side is correct.

Corbin, The sensor appears to be on the correct size according to the plans. The bag of bushings are for automotive spark plugs. Kevin

I mean the it was shipped mounted on the wrong side of the mounting plate. I will move it to the right side. -- Corbin N33QR

Thanks everyone!! Yes, I had confusion with the brass versus SS flush bolts. The SS are mentioned in the manual as included but they are not. So I will use my original prop bolts. Also, I think

The bushings are spark plug adapters

Could it be that you are holding the sensor upside down? Does it look OK if you flip it over? I think the stainless screws are because they need to be non-magnetic. Don’t think you have to change

Like Paul said, some confusion on the stainless steel screw because it looks like the wrong picture got attached. Definitely do NOT use stainless steel prop bolts. If your EIS is not configurable to

The third picture looks like spark plugs adapters to me. They adapt automotive sparkplugs to the 18mm hole in the cylinders. But maybe I'm just not seeing them correctly. Sorry, I can't comment on

Hey guys, My A&P has had too many delays so I am starting on the EIS install myself. I have two questions that should be easy clarification type questions. Pics also included below. First, is the

THANKS .. SAM and KEITH ... Terrific .. really enjoyed .., Graham ( Oz )

Ahh! Very good – thanks Mike! Jon

Quickheads has a copy of the AMS/OIL Racer First Flight report - great read for those interested. Interesting title for that Air & Space article, since Tom Aberle's "Phantom" most definitely holds

Hi Jon, Using youtubes "playlist" works! I just built one. https://youtu.be/tqHRuspBwC0 Instructions: Youtube PlayList Open your first video on youtube. See the Save at bottom. Hit that, then

Shameless plug to illustrate this. :-) My latest video: https://youtu.be/nYhqdcRz9fU The last 20 seconds are a static photo with and end screen. That end screen contains two video links (my

Mike, The only way I know if is to add an “End Screen” when publishing the video. You can then have a few options for video links and channel subscription link. You kinda need to include 20-30

Hi Sam, That format is exactly what I was thinking of using. His sound was very low but otherwise great quality. So the deal is, when it's turned over to me I will run the video and be able to talk

Last I heard reported in a bar in Reno. Samsung Galaxy Note 10+

Last I heard of the Racer it was hanging in the rafters of some bar back East. It was reconstructed but not flown again. I guess a nice enough tip to the bar owner might allow a guy to ladder up and