Date   

Re: First Q-List Zoom meeting - featuring Kevin Boddicker

 

Jay,
I’m a Q200wannabe but have a sonex. Our group has been doing this for a while now. I was at my hangar with my I phone on my normal Verizon network and it works great. Just need some earbuds 
Great idea!

MikeQ200wannabe 


On May 17, 2020, at 4:21 PM, Sam Hoskins <sam.hoskins@...> wrote:


Jay, 

You don't need wifi, just your smartphone, assuming you get a wireless signal. Today Kevin and I did a trial run with both of us on our phones and it was fine.

I'd like to keep this live. 

Sam 

On Sun, May 17, 2020, 6:06 PM Jay Scheevel <jay@...> wrote:
Great idea guys. I am game to host one of these sometime down the road, but since I cannot get WiFi at my home field/hangar, would it be possible to share a video of the tour and discuss it interactively from my computer at my office? I think that zoom has the capability of sharing a screen to show the pretaped video on.

Cheers,
Jay



Sent from my Verizon Wireless 4G LTE DROID


Sam Hoskins <sam.hoskins@...> wrote:

Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


Re: First Q-List Zoom meeting - featuring Kevin Boddicker

Sam Hoskins
 

Jay, 

You don't need wifi, just your smartphone, assuming you get a wireless signal. Today Kevin and I did a trial run with both of us on our phones and it was fine.

I'd like to keep this live. 

Sam 


On Sun, May 17, 2020, 6:06 PM Jay Scheevel <jay@...> wrote:
Great idea guys. I am game to host one of these sometime down the road, but since I cannot get WiFi at my home field/hangar, would it be possible to share a video of the tour and discuss it interactively from my computer at my office? I think that zoom has the capability of sharing a screen to show the pretaped video on.

Cheers,
Jay



Sent from my Verizon Wireless 4G LTE DROID


Sam Hoskins <sam.hoskins@...> wrote:

Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


Re: First Q-List Zoom meeting - featuring Kevin Boddicker

Jay Scheevel
 

Great idea guys. I am game to host one of these sometime down the road, but since I cannot get WiFi at my home field/hangar, would it be possible to share a video of the tour and discuss it interactively from my computer at my office? I think that zoom has the capability of sharing a screen to show the pretaped video on.

Cheers,
Jay



Sent from my Verizon Wireless 4G LTE DROID


Sam Hoskins <sam.hoskins@...> wrote:

Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
https://zoom.us/download 
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/73729060184?pwd=ZnVCNHZhZU84VXhOVWF6eWpjVGdHQT09
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


Re: First Q-List Zoom meeting - featuring Kevin Boddicker

Mike Dwyer
 

I like it.  Great idea!
Mike Q200 N3QP

On Sun, May 17, 2020, 4:26 PM Sam Hoskins <sam.hoskins@...> wrote:
Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


Re: First Q-List Zoom meeting - featuring Kevin Boddicker

Brian Larick
 

Awesome idea!!  Be there if I can.  Scheduled for my IRA Written 9-11 ET.

Brian

On May 17, 2020, at 16:26, Sam Hoskins <sam.hoskins@...> wrote:


Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
https://zoom.us/download 
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/73729060184?pwd=ZnVCNHZhZU84VXhOVWF6eWpjVGdHQT09
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


First Q-List Zoom meeting - featuring Kevin Boddicker

Sam Hoskins
 

Please join Kevin Boddicker and myself for our first Q-List Zoom meeting, to take place at this Saturday, 9:00 am,  May 23, Central Daylight Savings Time, USA (GMT-5). Kevin will broadcast from his hangar and give us a tour of his beautiful TriQ-200. The connection link is at the bottom of this email.
 
I was thinking that this might be a great way for members of this group to show their Quickie projects, either in the shop or flying. In the allotted time, Quickie enthusiasts could show their aircraft, then maybe have a question and answer session. Zoom has a feature where you can submit questions via chat.
 
The way we envision it, we would have an aircraft or shop tour, on a somewhat regular (monthly, semi-monthly?) by someone taking their smartphone or computer to the hangar and give us all a tour. With the freebie Zoom app we are limited to 100 participants and 40 minutes of air time, which I think are good numbers.  And by the way, I will be looking for more volunteers to show off their projects.
 
Zoom conferencing is supposed to work without using their app, but seems to function better with it installed. You can get the download here:
https://zoom.us/download 
 
Here are some general guidelines.
 
    • Do not log in until 08:59.
    • Leave your mic on mute.  It is up to you if you want to use your video or not.
    • You may ask Kevin questions via the Zoom chat function. (Do not use your mic). You will send them to me, then I’ll pass on to Kevin. For more info: https://support.zoom.us/hc/en-us/articles/203650445-In-Meeting-Chat 
    • Zoom automatically stops the meeting after 40 minutes have elapsed.
 
We are new to this, so please forgive the rough edges. 
 
Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: First Q-List Zoom meeting - featuring Kevin Boddicker
Time: May 23, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/73729060184?pwd=ZnVCNHZhZU84VXhOVWF6eWpjVGdHQT09
 
Meeting ID: 737 2906 0184
Password: 8HNNHS
 


Re: Autopilot

Dave Dugas
 

Thanks Phil. My data wire to the autopilot is connected to the TX pin on the HC-06 Bluetooth module and it connects to the Avare app fine.but no GPS data is received by the autopilot. This setup worked when I was using my old ipaq with Anywhere Map. I'm trying to keep it wireless. The TruTrak Pictorial Pilot will track a heading without a GPS source, but I still have to adjust the heading for wind correction. Your system sounds great. I'm going to keep trying for the wireless though. Thank you again.... Dave D


On Sat, May 16, 2020 at 1:24 AM, Phil Lankford via groups.io
<britmcman@...> wrote:
I have a TruTrak Vizion385 in my RV6A. I set it up to accept two separate GPS sources (wired) through a selector switch. Source 1 is a line from my Garmin 250XL. Source 2 is iLevil AW3 and is also a wired connection. My iPad apps (FlyQ EFB or Xavion) should be able to push a route to the iLevil via WiFi that will then direct the autopilot through the hard wired connection. I will be doing more inflight testing but ground test shows GPS OK to the autopilot. 

Phil


On May 15, 2020, at 12:50 PM, Dave Dugas via groups.io <davedq2@...> wrote:

Thanks Paul. I saw that one but I didn't get much usable info from it. I'll be digging deeper into it though. Thank you.
Dave


On Fri, May 15, 2020 at 1:37 PM, Paul Fisher
<rv7a.n18pf@...> wrote:
Hey Dave!  I have not done what you want, but I did see something on the Avare forums about it:


I don't know if that helps or not, but it sounds like it is possible.

Paul

On Fri, May 15, 2020, 12:10 Dave Dugas via groups.io <davedq2=yahoo.com@groups.io> wrote:
Hi there.
I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and ads-b system, and traffic and weather is great. 
The cherry on top would be if I could get my tablet to send data to my TruTrak autopilot through Bluetooth, so I can let the autopilot navigate the course on my Avare. I'm using a HC-06 Bluetooth serial adapter which is programed and linked to my TruTrak, however no data is transmitted to the autopilot. If anyone else is successful with this setup, or knows a source of information about it, it would be helpful. It just may be as simple as a com port setting, or a setting in the Avare app, but with my luck it may be impossible altogether. I know it sounds like I'm spoiled...... I am. Thank you 😊
Dave D



Re: Autopilot

Phil Lankford
 

I have a TruTrak Vizion385 in my RV6A. I set it up to accept two separate GPS sources (wired) through a selector switch. Source 1 is a line from my Garmin 250XL. Source 2 is iLevil AW3 and is also a wired connection. My iPad apps (FlyQ EFB or Xavion) should be able to push a route to the iLevil via WiFi that will then direct the autopilot through the hard wired connection. I will be doing more inflight testing but ground test shows GPS OK to the autopilot. 

Phil


On May 15, 2020, at 12:50 PM, Dave Dugas via groups.io <davedq2@...> wrote:

Thanks Paul. I saw that one but I didn't get much usable info from it. I'll be digging deeper into it though. Thank you.
Dave


On Fri, May 15, 2020 at 1:37 PM, Paul Fisher
<rv7a.n18pf@...> wrote:
Hey Dave!  I have not done what you want, but I did see something on the Avare forums about it:


I don't know if that helps or not, but it sounds like it is possible.

Paul

On Fri, May 15, 2020, 12:10 Dave Dugas via groups.io <davedq2=yahoo.com@groups.io> wrote:
Hi there.
I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and ads-b system, and traffic and weather is great. 
The cherry on top would be if I could get my tablet to send data to my TruTrak autopilot through Bluetooth, so I can let the autopilot navigate the course on my Avare. I'm using a HC-06 Bluetooth serial adapter which is programed and linked to my TruTrak, however no data is transmitted to the autopilot. If anyone else is successful with this setup, or knows a source of information about it, it would be helpful. It just may be as simple as a com port setting, or a setting in the Avare app, but with my luck it may be impossible altogether. I know it sounds like I'm spoiled...... I am. Thank you 😊
Dave D



Re: Autopilot

Dave Dugas
 

Thanks Paul. I saw that one but I didn't get much usable info from it. I'll be digging deeper into it though. Thank you.
Dave


On Fri, May 15, 2020 at 1:37 PM, Paul Fisher
<rv7a.n18pf@...> wrote:
Hey Dave!  I have not done what you want, but I did see something on the Avare forums about it:


I don't know if that helps or not, but it sounds like it is possible.

Paul

On Fri, May 15, 2020, 12:10 Dave Dugas via groups.io <davedq2=yahoo.com@groups.io> wrote:
Hi there.
I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and ads-b system, and traffic and weather is great. 
The cherry on top would be if I could get my tablet to send data to my TruTrak autopilot through Bluetooth, so I can let the autopilot navigate the course on my Avare. I'm using a HC-06 Bluetooth serial adapter which is programed and linked to my TruTrak, however no data is transmitted to the autopilot. If anyone else is successful with this setup, or knows a source of information about it, it would be helpful. It just may be as simple as a com port setting, or a setting in the Avare app, but with my luck it may be impossible altogether. I know it sounds like I'm spoiled...... I am. Thank you 😊
Dave D



Re: Autopilot

Paul Fisher
 

Hey Dave!  I have not done what you want, but I did see something on the Avare forums about it:


I don't know if that helps or not, but it sounds like it is possible.

Paul

On Fri, May 15, 2020, 12:10 Dave Dugas via groups.io <davedq2=yahoo.com@groups.io> wrote:
Hi there.
I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and ads-b system, and traffic and weather is great. 
The cherry on top would be if I could get my tablet to send data to my TruTrak autopilot through Bluetooth, so I can let the autopilot navigate the course on my Avare. I'm using a HC-06 Bluetooth serial adapter which is programed and linked to my TruTrak, however no data is transmitted to the autopilot. If anyone else is successful with this setup, or knows a source of information about it, it would be helpful. It just may be as simple as a com port setting, or a setting in the Avare app, but with my luck it may be impossible altogether. I know it sounds like I'm spoiled...... I am. Thank you 😊
Dave D


Autopilot

Dave Dugas
 

Hi there.
I've been flying a bit since I installed the Uavionix package in my Q2, which is working perfectly since it was installed. No adjustments or settings necessary. I'm using Avare as my nav and ads-b system, and traffic and weather is great. 
The cherry on top would be if I could get my tablet to send data to my TruTrak autopilot through Bluetooth, so I can let the autopilot navigate the course on my Avare. I'm using a HC-06 Bluetooth serial adapter which is programed and linked to my TruTrak, however no data is transmitted to the autopilot. If anyone else is successful with this setup, or knows a source of information about it, it would be helpful. It just may be as simple as a com port setting, or a setting in the Avare app, but with my luck it may be impossible altogether. I know it sounds like I'm spoiled...... I am. Thank you 😊
Dave D


Re: Quickie Q1 / Q2 Material

Jay Scheevel
 

Hi Eugen,

 

I never used the green urethane foam. The fuselage shells were built using ¼” foam (rear shells) and 3/8” foam for the forward shells. They were made using vacuum bagging in female molds. The fiberglass used for those shells was lighter than the 9oz bidirectional fiberglass that is used for wings/bulkheads/fuel tanks.  I am not sure of the weight of that cloth, since the shells were pre-built at the factory. There was one Tri-Q built in Canada without the use of the pre-made shells, so it is possible.

 

All of materials you list below are available from Aircraft Spruce.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Thursday, May 14, 2020 11:46 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Quickie Q1 / Q2 Material

 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 




Re: Quickie Q1 / Q2 Material

Eugen Pilarski
 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 




Quickie Q1 / Q2 Material

Eugen Pilarski
 

Dear Q-List member,

I´m on the way to investigate the requested foam material for build the aircraft parts. In the quickheads forum I catch that information below.  It would be glad if somebody added additional information or in best case a source, aircraft spruce is already knowed so far.

Q1 and Q2 Foam Material list 

Color description Source

blue foam styrofoam-1.6 lb/cu.ft. ?
Red 6 lbs/cuft ?
Gold/White 3.4 lbs/cuft ?
Blue 1.6 lbs/cuft ?
orange or green urethane 210 2.0 lbs/cuft  ?

Thank you very much.

Best regards from Germany

Eugen 


Re: Small town Q-driver makes bigtime publication

Jerry Marstall
 

Too scary for me.

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 5/13/20 3:28 PM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Hi Jerry,

 

Found just what you need to accessorize your “flight bag”

 

Cheers,

Jay

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jerry Marstall
Sent: Wednesday, May 13, 2020 8:47 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 

Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

 

The editor edited out my part on dealing with the condom.

 

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

 

-------- Original message --------

From: Bruce Crain <jcrain2@...>

Date: 5/13/20 10:32 AM (GMT-05:00)

Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi Jerry!

I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!

Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

 


Re: Small town Q-driver makes bigtime publication

Jay Scheevel
 

Hi Jerry,

 

Found just what you need to accessorize your “flight bag”

 

Cheers,

Jay

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jerry Marstall
Sent: Wednesday, May 13, 2020 8:47 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 

Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

 

The editor edited out my part on dealing with the condom.

 

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

 

-------- Original message --------

From: Bruce Crain <jcrain2@...>

Date: 5/13/20 10:32 AM (GMT-05:00)

Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi Jerry!

I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!

Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

 


Re: Small town Q-driver makes bigtime publication

Jerry Marstall
 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 
Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

The editor edited out my part on dealing with the condom.

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

-------- Original message --------
From: Bruce Crain <jcrain2@...>
Date: 5/13/20 10:32 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Hi Jerry!
I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!
Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry




Re: Small town Q-driver makes bigtime publication

Bruce Crain
 

Hi Jerry!
I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!
Bruce


---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry




Re: Q2 Project

Eugen Pilarski
 

Hello Q-List member,

the design of fuselage is done so far, please find some picture below that Email (scroll down to end). The next step is to fit in bulkheads and Jig-level boards. I will send a new update soon.

Best regards from Germany

Eugen



Am 04.05.2020 um 22:14 schrieb Eugen Pilarski <interbus@...>:

Hello Q-List member,

just a short notice about the progress of Q2 re-design. Currently the position of the bulkheads will be fixed and build up, after that the surface will be create. 

Best regards

Eugen 



Am 28.04.2020 um 17:05 schrieb Dave Hudak via groups.io <dghudie@...>:

Hi Brad, 
Any chance I could get a copy of what you have drawn thus far? I have a Q2 that I rebuilt years ago with a Subaru 1.8 liter, then crashed. I need to replace the canard and firewall and thought maybe a new drawing would help get me going on the the effort.  So any SolidWorks drawing would be much appreciated. 
The bird has been hanging from the ceiling since 2005 and I finally have the house at a point where I can think about the QBird......200 hours of the most fun I have ever had in an airplane!
Dave






On Apr 27, 2020, at 5:01 PM, sky_kid1080 <fly-boy1080@...> wrote:


I have some of the plane drawn up in solidworks I’d be willing to team up with someone and get it finished up. I have my own Q2 to finish and I like to do things right the first time. Sorry I know this is an older message and I don’t respond often.

Thanks,
Brad
 
Sent from Mail for Windows 10
 
From: Jay Scheevel
Sent: Friday, April 24, 2020 3:42 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
If you read the part of the plans about installing the bulkheads, they allow the builder to vary the angle and size of that bulkhead to compensate for pilot size. There is also some variation allowed in the forward/back position of the main tank for the same reason.  I would just suggest rotating the base of the bulkhead backward until it intersects the fuselage. The original plan required a lot of cutting and fitting. The 4 fuselage shells were oversized and needed to be trimmed and there were no marks to help the builder do this, only small drawings. There was a lot of work involved to get a good fit between fuselage and bulkheads. No two of these planes are identical once they are complete.
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 1:21 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Yup, that’s right. Do you have a angel between the seat bulkhead top und bottom? Not sure which angle they should? Something else between 130° and 150° maybe?
 
Eugen

 

Am 24.04.2020 um 20:28 schrieb Jay Scheevel <jay@...>:
 
Your seatback bulkhead (the inclined portion) needs to intersect the bottom of the fuselage. 
 
Cheers,
Jay
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 12:16 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Here we go :-)

<image001.png>

<image002.png>
 

 
<Bildschirmfoto 2020-05-04 um 22.11.35.png>


Re: Small town Q-driver makes bigtime publication

John Hoxie
 

Thanx Jerry.
Very informative.  I plan on getting one for use in my ultralights & Q2. I plan on eventually building & using on some flights a 25 gallon long range tank, giving me about 50 gallons usable fuel for some solo flights.


On Tue, May 12, 2020 at 7:59 PM, One Sky Dog via groups.io
<Oneskydog@...> wrote:
Good editorial Jerry,

Clever idea! Reminds me of a briefing I got at Wright Paterson AFB at least a decade ago.

Charlie 


On May 12, 2020, at 4:42 PM, Jerry Marstall <jnmarstall@...> wrote:



Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry