Here's some how-to-do-it tips. This isn't everything. Desktop computer: The main site is https://q-list.groups.io/g/main Note that plain https://q-list.groups.io also works. There is a whole bunch of

It's listed in the Files section of the Q-List. https://q-list.groups.io/g/main/files/T-Nuts%20in%20Foam.pdf

Corbin purchased a beautiful Q-200, and like most of us, he can't leave well enough alone. Join us and see this great plane and the mods that Corbin has installed and has planned. As usual, the sessio

Corbin,

I'm sorry I didn't make a January 1st flight, but at least I made a January 4th flight. I was a little delayed by completing my annual condition inspection, plus the weather wasn't the greatest. I mad

Corbin purchased a beautiful Q-200, and like most of us, he can't leave well enough alone. Join us and see this great plane and the mods that Corbin has installed and has planned. As usual, the sessio

#Q-Tour

Pure epoxy works just fine. Just make sure you have good coverage. An aluminum tank makes no sense. As for compounds to prevent leaks, that's what the epoxy is for. I have heard of people of applying

No tour, just a general idea exchange. Saturday 09:00 Central time. https://us04web.zoom.us/j/72984066294?pwd=aGI1MXV6N0E2dWVJU2FsbldoL091QT09 Meeting ID: 729 8406 6294 Passcode: 7bik6e

Sure. Good idea. Use the same link I previously sent out and you'll be good for 40 minutes.

Matthew had some scheduling problems come up, so we're going to take a rest this month. We should be back on track in January. Thanks all. Sam Hoskins

This month's Q-Tour features Matthew Curcio. I met Matthew at Oshkosh and he had just acquired a Q-200 and was living in Ohio. He got the plane up and running and got a job at Scaled Composites. Since

STOP!!! Thanks everyone. We just made the $110, I appreciate your donations. If you missed your chance, you'll just have to wait till next year. Sam

Hello All. The annual renewal has come up for our little Quickie email list. When Verizon acquired Yahoo! they cut way back on their Groups section and as of next month they are completely killing it.

Here is Bruce & Joanne! https://youtu.be/oVKt3b14fMk Just to simplify things, I included both parts into one video. The Q&A session, Part II, starts at 31:45. Thanks to Bruce & Honey Lamb and everyone

#Q-Tour

There will be a certain amount of play in the crankshaft, so be sure to load the prop forward when you establish your clearance.

My LSE installation had a very different setup, it had circuit board mounted to the front of the crankcase,, so I don't really know what I'm talking about here. But, it does look like your mounting bl

There have been various W&B sheets loaded to the Files section of the Q-list site. You might want to check there. Sam

From Enid, Oklahoma join Bruce and Joanne as they show off their beautiful Tri-Q200. This aircraft has the Wadalow canard and an extended wing. He also has an MT variable pitch prop. As usual, we'll h

Something that small and non-structural I would use JB Weld. Sam

From Enid, Oklahoma join Bruce and Joanne as they show off their beautiful Tri-Q200. This aircraft has the Wadalow canard and an extended wing. He also has an MT variable pitch prop. As usual, we'll h