Hi Guys, Here is a couple of shots of the Teflon hose trial installation on my Triq200.Looks like it will work quite well with the angled unions, and will keep the Nylaflow away from the worst of the

Hi Guys, Has anyone had trouble with the eccentric reflex donut binding in the outer ring ? The phenolic is in good condition, but perhaps the tolerance is too tight. What sort of clearance should it

Thanks for the info Jim, What 3M product do you use, presume its a synthetic based grease. Richard. T

Does anyone have a source for the Bellevue washers for the uprated Scott Swing Nose gear please. Anybody have any or does FLAP have any stock please. Richard Thomson G-BMFN UK.

Jon, Its worth checking the distance centre of the axles to a point on the canard, leading edge is probably easiest, unless you have access to a laser alignment tool. I found that there was a slight d

Hi Jay, Any effect will be minimal with those amounts of misalignment, but worth knowing what it is before you do any axle alignment or it may not cure the problem. You might end up with Toe-out one s

I tried to get on Quickheads just now, and the Anti virus denied access. it stated the object is infected by HUER: Trojan Script Iframer. Can someone let Dan know to check it out. Rich T.

Happy new year to you Kevin, and to all the guys on the list. Starting this year with the 0-200 back together, some bolt on bits to sort out, some knitting left to do and the paperwork to finish. So c

Hi Rob, Most popular designs are well tested to destruction and improvements are tested properly. The Long eze is a good example, and if you read the Canard Pushers that Burt published, he details all