All good Sam, it was just a thought. I will try and make it :) All the best Paul

Hi Sam, Thanks for organising this, it will be a great benefit to those of us stuck in the holding pattern of building/restoring. As it will be 01.00 here, I am not sure if it is possible to record me

Great story Mike :) Pesky Cherokees getting in the way :) Clear skies Matey Paul --

As always a great report Mike :) Video to follow? Clear skies and Tailwinds Matey Paul --

https://www.youtube.com/watch?v=FCARADb9asE --

Well done again Mike :) Thanks for the video, 8/8 cu with TS due tonight...and this is Summer :) All the best Paul Virus-free. www.avg.com

Dang, How cool doing a beat up WITH permission 😊 they crack a bag (get angry) when I do it..party poopers 😊 Clear skies matey Paul Sent from Mail for Windows 10

Hi Mike, Did you video the flight? :) sounds like a great trip. bad smoke from the bushfires up North and high temps (40+C) flying has been out of the question. but this will pass. Clear skies Paul--

Hi Michael, That post was mine, in relation to the raised lines on the wheel "ribs". The bearing are from CBC bearings in Australia but you should be able to go to your local bearing (specialised) sho

Tempting, even given the trip to the US to pick it up. :) --

Mike, I am guessing that the boards are 2 x 4ish with the metal knife edge screwed onto the top boards. Is the whole shebang bolted together or do you have the top boards just sitting on the cross boa

Congratulations Jim, Job well done --

Thanks Matey, I have a few nuts to flox in place in the brake system (cabin and pods where the brake support brackets were just held on with nuts and washers and crushed the foam inside the pod) so th

Hi Guys, I hope that you all had a good Christmas and that the new year is full of clear skies and tailwinds. I am currently incorporating the La Rue brake mod with dual master cylinders. I am intendi

Well done matey, 58 hours, you are ahead of the norm there. Fingers crossed and a lot of work and I will have Jessica in the air before our Summer (Australia). All the best for many many more hours of

Thanks Sam, I am about ready to flip her over to prep the underside then final paint so this info really helps. Have a good one Paul --

I was sent this article on CAMiT engines. I hope that you find it useful. All the best Paul PS 15%? really? That inspires confidence. Have a good one guys --

Merry Christmas to all. For those of us that are still ground bound while working to get the damn thing airborne I was given a softcopy of the lionheart Q200. Lionheart Creations - Q200 for FSX and P3

Thanks Guys, I was going to ask you about whether I should micro and conformally sand the pos Sam too thanks for answering that question too :) I will get an exact measurement of the pod holes to chec

Thanks Dave, I will replace the axles with steel tubing. Sorry Sam, she is a Q2 tail dragger with hydraulic hand operated brakes. I have overhauled the brake units and will fit them when I fit the new