Arden is in the suburbs of Asheville Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

QAC’s stated reason for putting the strainers inboard was, “ we can use a smaller strainer by putting it in the prop wash”. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinern

Jay I like your cleaver N# N8WQ “Innate Wild Quickie” Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

Safe-t-poxy is now called EZ-poxy

Great job Jay!!! Do you have the water cooled heads? Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

Or maybe just roll inverted. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

It’s plans built from plans supplied by Dave Thatcher of Thatcher Aircraft. It’s called a Thatcher CX4. There is a 2 seat tandem called a CX5 and a 2 seat, side by side prototype being painted now and

You know how well that works. I used to think that the problem was too much to do. Now I know I’m just getting slower and slower and slower. Any suggestions? Earnest Martin 40 Glen Cove Drive Arden NC

I hope to be there but it’s too soon for me to make a firm commitment.

$5 must buy a lot more in Oklahoma. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

The more forward the caster the higher centering but when you get the caster too high it gets hard to turn so it’s a balancing act. I’d love to hear an explanation of how this really works.

Jay, you are correct, the plans call for toe in and here is why. When you touch down on landing the gear spreads scrubbing the tire outward and dissipating energy. Toe out would cause the gear too col

Thanks Jay, I think you’re going happy with the things done. I look forward to your flight results. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

Neither the canard nor the main wing are near the aircraft’s CG. Probably constantly changing CG as fuel burns off. Easily loaded outside CG range. Earnest Martin 40 Glen Cove Drive Arden NC 28704-321

Matthew, I am a previous Q200 owner and I flew mine for 1250 hours. A couple of things I learned might help. First when I installed my strainers per plans they would occasionally stall. Usually it hap

We are all indebted to Paul, Terry, Honey Lamb, Nancy, and especially Tama for doing all the planing, cooking, chauffeuring us around. Not to mention Tamar's tedious work on the incredible tee shirts.

Didn't think of that. That sheds light on the oddity. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...

Jerry knows everything there is to know about sanding.

You to too much time on your hands. Earnest Martin 40 Glen Cove Drive Arden NC 28704-3219 828-230-5378 martinerni@...