Doug Another great issue.... Dave, Great article for the 1st timer

Ernest, I had this problem so you had to put the right rudder pedal to the floor and still tap the right brake. I pulled the wheels, greased the bearings and retighened both sides equally - not 100% b

If VG's have a number of benefits other than bug and rain control, has anyone ever tried them on an LS1 ?

Does anyone have a manual for adjusting a POSA carb ? Thanks, Tad

Joseph, Are you building a trike or tail Q ? When I put my DF together and had it inspected, There was a concern that I had sealed around the canard and lost the 1/8th in gap between the fuselage and

Mattoon? Is there an annual event in Mattoon ? That is like only 100 miles away.... Is there a calendar of the annual events ? Anyway to move FOD away from my wedding anniversary ? Sure would love to

Raoul, Sadly, it seems you are correct. Here is the local news article. BRANSON, Mo. - A Florida man died when the small plane he was piloting crashed Friday morning in the woods of the Ruth and Paul

Sam, Last year when test flying was in scope, I used the same student pilot check list I had with my Cessna pack. I was a 40 hr student pilot with 200 + touch in goes in 152/172. I didn't have a clue

All, I have been a member here for several years and have extensively read back post, asked many questions, received a mixed bag of feedback from many ranging from 'don't forgets' through some pretty

Anyone have any revmaster 1835 parts for sale in airworthy condition ? Prop, Spinner, Carb, Mags, Maybe even a 69MM Crank ? Contact me off list, Thanks, Tad Simpson rebeccaandtad_simpson@...

FYI http://cgi.ebay.com/ebaymotors/Quickie-Tri-Q1-single- place_W0QQitemZ300022022130QQihZ020QQcategoryZ63677QQrdZ1QQcmdZViewItem

I have a spam can project with a revmaster and to get the lower plugs/plug wires, I went to the harware store and got the $1.99 cheap spark plug wrench made from what looks like thinwall pipe. I cut a

Chris, I hauled my project on a 24ft trailer that worked really well. Because of the hoop gear, we had to put 2x12 across the trailer it was actually 6" wider than the legal 8ft wide in the US. Search

Keith, I too want to say thanks for hosting the flyin. Between graduations Friday PM and the kids calling to say they were hit by a deer, our time there was limited. Seeing you Quickie up close made t

I have recently had a starter clutch failure on my C90-12F and I am upgrading from the delco-remy. Reading the archives, seems there have been a lot of upgrades to either B&C or sky-tec and even some

All, In December there were several posts regarding the 30-3G headsets. Looking at comparison charts, there is little difference between the 20-3G and 30-3G 4db ANR and $130. My only experience with A

For all those seeking parts 0200 etc the dragonfly list just had a post of a low time 0200 for I think $5700 as well as several plane projects between $1000 and $7000.....Lots of items I'd love to hav

Leon, How Much on the LS-1? What is the span ? Tad Simpson 1 canard for my well wing as

Jim, There is an area approx 2.5" dia that has a small bubbling effect (pimples). Sam spent a day with me educating me on engine cooling and brought it to my attention as potential delamination. I mus

Joseph, The delamination is on the top / leading edge of the rear wing. Glass to foam (assume) I am not a builder. composition have right ----------- of Service. -----------