Progress update


Joseph M Snow <1flashq@...>
 

I am really sorry about not getting this link correct. Try this one:

http://corvairq.info/Microfiller.htm

Joseph


Richard Thomson
 

Joseph,
One tip that I saw on the Canard Aviators site from Ken Miller I
believe, was if you are using epoxy primer add some dry micro in any
pin holes or small defects as you paint. It bonds tight and is easy
to sand ready for paint. I tried a small tester and it seems to work
quite well.

Rich Thomson
TriQ G-BMFN 368 hours old
richard@cloudland.co.uk







--- In Q-LIST@yahoogroups.com, Joseph M Snow <1flashq@...> wrote:

I am really sorry about not getting this link correct. Try this
one:

http://corvairq.info/Microfiller.htm

Joseph


[Non-text portions of this message have been removed]


Joseph M Snow <1flashq@...>
 

Thanks for the tip. I am using PPG DP90LF two part black primer. Since it is also a UV barrier and is appropriate for PPG finish coats, I will be using it as the final primer. Hopefully, I will have fixed all defects. If some defects do show up, I will give it a try.

Perhaps your primer to primer delamination was casued by using different brands of primer or inadequate sanding prep.

Joseph

viggenbuilder2 <richard@cloudland.co.uk> wrote:
Joseph,
One tip that I saw on the Canard Aviators site from Ken Miller I
believe, was if you are using epoxy primer add some dry micro in any
pin holes or small defects as you paint. It bonds tight and is easy
to sand ready for paint. I tried a small tester and it seems to work
quite well.

Rich Thomson
TriQ G-BMFN 368 hours old
richard@cloudland.co.uk

--- In Q-LIST@yahoogroups.com, Joseph M Snow <1flashq@...> wrote:

I am really sorry about not getting this link correct. Try this
one:

http://corvairq.info/Microfiller.htm

Joseph