Date
1 - 13 of 13
Bushings
|
Jerry Marstall <jnmarstall@...>
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- Subject: Fwd: Bushings Sent from my Verizon, Samsung Where do you guys buy O200 Motor mount rubber bushings replacements? Part number? Thx Jerry Sent from my Verizon, Samsung Galaxy smartphone |
|
|
|
Aircraft Spruce has them. Be sure you are sitting down when you look at the price. Sam Sent via wireless Gizmo. On Apr 11, 2017 6:57 AM, "Jerry Marstall jnmarstall@... [Q-LIST]" <Q-LIST@...> wrote:
|
|
|
|
quickieaircraft
Agreed. You want 8 of part number 530740. I last ordered a set from A/C Spruce in mid 2013 when they were $16.50 each. I see they are now $19.50
http://www.aircraftspruce.com/catalog/eppages/contmountparts.php. I suggest you measure the metal spacer inside them (p/n 530627-0200) while you have the assembly apart. It's a thin tube and seems to be the weakest part of the assembly. I have seen a couple of installations where the spacer had compressed (overtorque, overload, rough landing??). I can't remember the specified length but if the spacers aren't all the same length, I would replace them all (4 total). A/C Spruce will charge you $29 for each, so I've been buying them from Univair for $18 each. Best, Emron TriQ200 ~15ish hours |
|
|
|
Jerry Marstall <jnmarstall@...>
I didn't see it in the catalog. I called them and the sales representative didn't have a clue what I was talking about so I came to the experts on the list. I didn't have to sit down it knocked me down Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Sam Hoskins sam.hoskins@... [Q-LIST]" <Q-LIST@...> Date: 4/11/17 8:01 AM (GMT-05:00) To: Quickie List <Q-LIST@...> Subject: Re: [Q-LIST] Fwd: Bushings Aircraft Spruce has them. Be sure you are sitting down when you look at the price. Sam Sent via wireless Gizmo. On Apr 11, 2017 6:57 AM, "Jerry Marstall jnmarstall@... [Q-LIST]" <Q-LIST@...> wrote:
|
|
|
|
Jerry, check Ebay. Much cheaper The only problem is, you don't know how old they are. I just bought some $16.00 exhaust Blo-Pruf gaskets for $5.00. They look okay. Sam On Tue, Apr 11, 2017 at 6:53 AM, Jerry Marstall jnmarstall@... [Q-LIST] <Q-LIST@...> wrote:
|
|
|
|
John Hartley
I use a shorter bushing that brings the engine a little further aft (maybe 1/2") for CG. They've been selling then on eBay ( http://www.ebay.com/itm/282357542042 ) for years. First time you use them, you have to buy a kit. The next time you replace them, you can just buy the rubber for ~$60 for the entire set.
toggle quoted message
Show quoted text
---In Q-LIST@..., <jnmarstall@...> wrote : I didn't see it in the catalog. I called them and the sales representative didn't have a clue what I was talking about so I came to the experts on the list. I didn't have to sit down it knocked me down Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Sam Hoskins sam.hoskins@... [Q-LIST]" <Q-LIST@...> Date: 4/11/17 8:01 AM (GMT-05:00) To: Quickie List <Q-LIST@...> Subject: Re: [Q-LIST] Fwd: Bushings Aircraft Spruce has them. Be sure you are sitting down when you look at the price. Sam Sent via wireless Gizmo.
|
|
|
|
quickieaircraft
John, this is neat. Are you aware of any drawbacks to converting to cone-mounts? I may not be a candidate due to clearance.
Best, Emron |
|
|
|
Jerry Marstall <jnmarstall@...>
I'll check. Thx. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Sam Hoskins sam.hoskins@... [Q-LIST]" <Q-LIST@...> Date: 4/11/17 12:04 PM (GMT-05:00) To: Quickie List <Q-LIST@...> Subject: Re: [Q-LIST] Fwd: Bushings Jerry, check Ebay. Much cheaper The only problem is, you don't know how old they are. I just bought some $16.00 exhaust Blo-Pruf gaskets for $5.00. They look okay. Sam On Tue, Apr 11, 2017 at 6:53 AM, Jerry Marstall jnmarstall@... [Q-LIST] <Q-LIST@...> wrote:
|
|
|
|
Kevin Sheely
Jerry, I replaced mine last year using ACS p/n 07-01131 (J-3608-1 Lord Rubber Mount). Kevin |
|
|
|
Jerry Marstall <jnmarstall@...>
Thanks Kevin. J Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Kevin Sheely kjsheely1@... [Q-LIST]" <Q-LIST@...> Date: 4/11/17 5:43 PM (GMT-05:00) To: Q-LIST@... Subject: [Q-LIST] Re: Fwd: Bushings Jerry, I replaced mine last year using ACS p/n 07-01131 (J-3608-1 Lord Rubber Mount). Kevin |
|
|
|
Hi Jerry,
Call Fresno Airparts, Fresno,CA. They are about $35.00 for the rubber bushing set. Regards, Jim N46JP |
|
|
|
Jerry Marstall <jnmarstall@...>
Thx Jim. That's a winner. Greatly appreciated. Jerry Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "logistics_engineering@... [Q-LIST]" <Q-LIST@...> Date: 4/12/17 11:56 AM (GMT-05:00) To: Q-LIST@... Subject: RE: [Q-LIST] Re: Fwd: Bushings Hi Jerry, |
|
|
|
John Hartley
No drawbacks that I've noticed. Unless you already have no clearance between spinner and cowl or your cg is too for aft (is that even possible? )
I installed mine during revmaster to o-200 swap. I anticipated having a forward cg issue and installed these mounts during the conversion to help address it before it occurred. Come to think of it, I probably wouldn't have considered them if my plane was already flying and just needed new bushings - unless there was an excessive gap between the spinner and cowling and the CG needed top move aft. My $0.02 John ---In Q-LIST@..., <quickieaircraft@...> wrote : John, this is neat. Are you aware of any drawbacks to converting to cone-mounts? I may not be a candidate due to clearance. Best, Emron |
|
|