Topics

Quickie Q1 / Q2 Material

Jay Scheevel
 

There is a link at the bottom of the page that says Unsubscribe. Try that.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of overlormustafa
Sent: Wednesday, May 27, 2020 11:13 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] Quickie Q1 / Q2 Material

 

Can someone, pretty please, remove me from this list?

 

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.

overlormustafa <overlordmustafa@...>
 

Thank you.

On Wed, May 27, 2020 at 12:26 PM Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:
Totally understand.  Then best option is to use the link below to unsubscribe.  No password needed as it works as any other site.  Or you could use the "forgot password" option and manage appropriately.

Corbin

On May 27, 2020 at 12:22 PM, overlormustafa <overlordmustafa@...> wrote:

I don't have a password as I did not sign up for the new group/forum...

On Wed, May 27, 2020 at 12:17 PM Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:
Easiest way is to do it yourself using the links available.  You can unsubscribe or manage your subcription with the links.

Corbin Ge!ser

On May 27, 2020 at 12:13 PM, overlormustafa <overlordmustafa@...> wrote:

Can someone, pretty please, remove me from this list?

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.






--

Corbin 
N33QR






--

Corbin 
N33QR

Corbin
 

Totally understand.  Then best option is to use the link below to unsubscribe.  No password needed as it works as any other site.  Or you could use the "forgot password" option and manage appropriately.

Corbin

On May 27, 2020 at 12:22 PM, overlormustafa <overlordmustafa@...> wrote:

I don't have a password as I did not sign up for the new group/forum...

On Wed, May 27, 2020 at 12:17 PM Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:
Easiest way is to do it yourself using the links available.  You can unsubscribe or manage your subcription with the links.

Corbin Ge!ser

On May 27, 2020 at 12:13 PM, overlormustafa <overlordmustafa@...> wrote:

Can someone, pretty please, remove me from this list?

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.






--

Corbin 
N33QR






--

Corbin 
N33QR

overlormustafa <overlordmustafa@...>
 

I don't have a password as I did not sign up for the new group/forum...

On Wed, May 27, 2020 at 12:17 PM Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:
Easiest way is to do it yourself using the links available.  You can unsubscribe or manage your subcription with the links.

Corbin Ge!ser

On May 27, 2020 at 12:13 PM, overlormustafa <overlordmustafa@...> wrote:

Can someone, pretty please, remove me from this list?

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.






--

Corbin 
N33QR

Corbin
 

Easiest way is to do it yourself using the links available.  You can unsubscribe or manage your subcription with the links.

Corbin Ge!ser

On May 27, 2020 at 12:13 PM, overlormustafa <overlordmustafa@...> wrote:

Can someone, pretty please, remove me from this list?

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.






--

Corbin 
N33QR

overlormustafa <overlordmustafa@...>
 

Can someone, pretty please, remove me from this list?

On Wed, May 27, 2020 at 3:19 AM Eugen Pilarski <interbus@...> wrote:

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.

Eugen Pilarski
 

Please find in the attachment the technical data sheet for the aircraft spruce units with part# 01-10600 large cell XPS PIB Extruded Polystyrene Pipe Insulation Billet and 01-09400 small cell STYROFOAM™ Brand Extruded Polystyrene Foam (XPS). I get this technical data sheet after a request at Aircraft spruce. The main different are the Compressive Strength with 20psi (large cell) and 25psi (small cell) is around 20%, density of 1.6lb/cu ft (large cell) and 2 lb/cu ft (small cell) is around 20% too.

Jay Scheevel
 

Hi Eugen,

 

I never used the green urethane foam. The fuselage shells were built using ¼” foam (rear shells) and 3/8” foam for the forward shells. They were made using vacuum bagging in female molds. The fiberglass used for those shells was lighter than the 9oz bidirectional fiberglass that is used for wings/bulkheads/fuel tanks.  I am not sure of the weight of that cloth, since the shells were pre-built at the factory. There was one Tri-Q built in Canada without the use of the pre-made shells, so it is possible.

 

All of materials you list below are available from Aircraft Spruce.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Thursday, May 14, 2020 11:46 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Quickie Q1 / Q2 Material

 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 



Eugen Pilarski
 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 



Eugen Pilarski
 

Dear Q-List member,

I´m on the way to investigate the requested foam material for build the aircraft parts. In the quickheads forum I catch that information below.  It would be glad if somebody added additional information or in best case a source, aircraft spruce is already knowed so far.

Q1 and Q2 Foam Material list 

Color description Source

blue foam styrofoam-1.6 lb/cu.ft. ?
Red 6 lbs/cuft ?
Gold/White 3.4 lbs/cuft ?
Blue 1.6 lbs/cuft ?
orange or green urethane 210 2.0 lbs/cuft  ?

Thank you very much.

Best regards from Germany

Eugen