I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.

Corbin,

I installed the Dynon D100 A/P back when the world was flat.  Next time to the airport I'll take pix for you.  My elevator control hookup has served me well.

Jerry Marstall 

-------- Original message --------

From: "Corbin via groups.io" <c_geiser@...>

Date: 6/29/20 9:41 AM (GMT-05:00)

To: main@Q-List.groups.io

Subject: [Q-List] Placement Ideas for A/P Servo for Pitch Control

I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.

Corbin

Corbin,

I installed the Dynon D100 A/P back when the world was flat.  Next time to the airport I'll take pix for you.  My elevator control hookup has served me well.

Jerry Marstall 

-------- Original message --------

From: "Corbin via groups.io" <c_geiser@...>

Date: 6/29/20 9:41 AM (GMT-05:00)

To: main@Q-List.groups.io

Subject: [Q-List] Placement Ideas for A/P Servo for Pitch Control

I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.

Corbin

Corbin,

See attached pictures for elevator servo. 155640 is the aileron servo.

My canopy hinges forward which give me easy access to my hinged instrument panel.

Kevin

On Monday, June 29, 2020, 08:09:22 PM EDT, Corbin via groups.io <c_geiser@...> wrote:

Thanks Kevin!  Would love to see your servo setup.

Corbin

On Jun 29, 2020, at 6:49 PM, Kevin Sheeley via groups.io <kjsheely1@...> wrote:

Corbin,

I will get some pictures for you this week. I can't seam to find mine.

BTW, I removed my spring bias system so now I use my reflexor for elevator pressure relief.

Kevin

On Monday, June 29, 2020, 10:04:32 AM EDT, Corbin via groups.io <c_geiser@...> wrote:

Thanks Jerry.  Appreciate it!

Corbin 

On June 29, 2020 at 9:03 AM, Jerry Marstall <jnmarstall@...> wrote:

Corbin,

I installed the Dynon D100 A/P back when the world was flat.  Next time to the airport I'll take pix for you.  My elevator control hookup has served me well.

Jerry Marstall 

-------- Original message --------

From: "Corbin via groups.io" <c_geiser@...>

Date: 6/29/20 9:41 AM (GMT-05:00)

To: main@Q-List.groups.io

Subject: [Q-List] Placement Ideas for A/P Servo for Pitch Control

I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.

Corbin

--

Corbin 
N33QR

--

Corbin 
N33QR