Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration


Bruce Crain
 

Kevin,
Take off your old exhaust and send it in to this company.  https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.  You will get a lot longer service life.
They do wonderful work!
Bruce Crain


---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)




Richard Thomson
 

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.  https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.  You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)


Bruce Crain
 

Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce


---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)



Mike Dwyer
 

15 years later these pipes are still perfect!


On Tue, May 11, 2021 at 2:24 PM Bruce Crain <jcrain2@...> wrote:
Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce

---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)



Kevin Sheeley
 

Thanks, I have taken it down there probably 4 or 5 times already for patches. I am looking to change to 4 individual pipes someday.

On Tuesday, May 11, 2021, 9:52:00 AM EDT, Bruce Crain <jcrain2@...> wrote:


Kevin,
Take off your old exhaust and send it in to this company.  https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.  You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)


Richard Thomson
 

    So no mufflers in sight ? Sounds just like mine. Except they are just steel. so noise abatement procedures in your town ?

    Rich T

On 11/05/2021 19:22, Bruce Crain wrote:
Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce

---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)



Mike Dwyer
 

Mufflers need space to install, we don't have any.  They get very hot so they can't be installed under the composite wing.  Ya, mufflers aren't possible.
Mike Q200

On Wed, May 12, 2021, 4:05 AM Richard Thomson <richard@...> wrote:

    So no mufflers in sight ? Sounds just like mine. Except they are just steel. so noise abatement procedures in your town ?

    Rich T

On 11/05/2021 19:22, Bruce Crain wrote:
Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce

---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)



Bruce Crain
 

No mufflers.  Some airports have a noise abatement but we are not as loud as T38's.
Bruce


---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Wed, 12 May 2021 09:05:06 +0100

    So no mufflers in sight ? Sounds just like mine. Except they are just steel. so noise abatement procedures in your town ?

    Rich T

On 11/05/2021 19:22, Bruce Crain wrote:
Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce

---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)



Richard Thomson
 

    Well great Video Mike, at least you got all the landing in this time, all helps with my training you know..

    Br

Rich T.

On 12/05/2021 12:53, Mike Dwyer wrote:
Mufflers need space to install, we don't have any.  They get very hot so they can't be installed under the composite wing.  Ya, mufflers aren't possible.
Mike Q200

On Wed, May 12, 2021, 4:05 AM Richard Thomson <richard@...> wrote:

    So no mufflers in sight ? Sounds just like mine. Except they are just steel. so noise abatement procedures in your town ?

    Rich T

On 11/05/2021 19:22, Bruce Crain wrote:
Yep and nope!  I did get my pipes built there and nope it is 2 into 1 on both  sides.  They will replicate your pipes to fit.  Great to work with and quick.
Bruce

---------- Original Message ----------
From: "Richard Thomson" <richard@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with orig inal 4 into 1 configuration
Date: Tue, 11 May 2021 15:05:47 +0100

Did you get yours done there Bruce, Is it a wrap around the front ?

Rich T

On 11/05/2021 14:50, Bruce Crain wrote:
Kevin,
Take off your old exhaust and send it in to this company.��https://planexhaust.com/
They can build you a stainless exhaust using your old exhaust.� You will get a lot longer service life.
They do wonderful work!
Bruce Crain

---------- Original Message ----------
From: "Kevin Sheeley via groups.io" <kjsheely1@...>
To: main@Q-List.groups.io
Subject: [Q-List] Wanted - exhaust stacks for the O200A in a Q200 with original 4 into 1 configuration
Date: Mon, 10 May 2021 17:04:48 -0700

Does any have a set of exhaust stacks from the original kit that they would be willing to sell? Mine are starting to have holes in them.

Kevin (Q200, dragger, 480 hours)