W&B


Chris Walterson
 

Still doing my W&B.  I have most of my hair pulled outand was reading the Q manual.

 On page 4-3 it shows the sample loading problem. It has the total weight being 822 and the moment being 36607.7. If you divide the moment by the weight you get 44.5.  On page 4-4 you can see that puts the CG back, outside  of the envelope.

 Is is wrong or is it a trick problem?  Take care------------- Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Jay Scheevel
 

Hi Chris,

Don't use the Q2 POH. The Q200 expanded the cg range from 42-44 in the Q2 to 42-47.

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Chris Walterson
Sent: Friday, July 16, 2021 5:05 PM
To: main@Q-List.groups.io
Subject: [Q-List] W&B

Still doing my W&B. I have most of my hair pulled outand was reading the Q manual.

On page 4-3 it shows the sample loading problem. It has the total weight being 822 and the moment being 36607.7. If you divide the moment by the weight you get 44.5. On page 4-4 you can see that puts the CG back, outside of the envelope.

Is is wrong or is it a trick problem? Take care------------- Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Jim Patillo
 

Chris my Q200 Taildragger weighs 740 lbs empty and 1340 gross. The cg. is from 41.7 to 47.5, if I remember correctly. Fully loaded, the airplane is at the aft cg. of 47.5. 

Pilot only, 5 gal. header only, no bags, forward cg
Pilot only, with 20 gal. fuel, mid cg.
Pilot and passenger only with 20 gal fuel, mid cg.

Pilot and passenger with full main, full header, 6 gal aux tank and small amount of baggage behind pilot, aft cg.

Hope that helps narrow your issue down. 

Jim
N46JP Q200

Sent from Outer Space


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Chris Walterson <dkeats@...>
Sent: Friday, July 16, 2021 4:04:44 PM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: [Q-List] W&B
 
Still doing my W&B.  I have most of my hair pulled outand was reading
the Q manual.

  On page 4-3 it shows the sample loading problem. It has the total
weight being 822 and the moment being 36607.7. If you divide the moment
by the weight you get 44.5.  On page 4-4 you can see that puts the CG
back, outside  of the envelope.

  Is is wrong or is it a trick problem?  Take care------------- Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus