Date
1 - 2 of 2
CS-7 mounting
|
Sandaircraft
I now have quickie on the brain, if i relax a little i start thinking about the project.
One thing i noticed as im pulling aileron linkages and ailerons is i wasnt happy with the CS-7 (ill call assembly) mounting. I could deflect it up and down without much force. It looks like its mounted to the bulkhead fs94 which if im correct is only covered by 1 bid layer. Now as i look at online plans it looks like it should be mounted to the main wing shear web and notched into the bulkhead. Am i correct on this?
|
|
|
|
You are correct. The CS supports should all mount against the wing, not the
toggle quoted messageShow quoted text
bulkhead. I suggest you rebuild those mounts and mount them per plans to the wing shear web. Cheers, Jay
-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sandaircraft Sent: Wednesday, July 27, 2022 6:22 PM To: main@q-list.groups.io Subject: [Q-List] CS-7 mounting I now have quickie on the brain, if i relax a little i start thinking about the project. One thing i noticed as im pulling aileron linkages and ailerons is i wasnt happy with the CS-7 (ill call assembly) mounting. I could deflect it up and down without much force. It looks like its mounted to the bulkhead fs94 which if im correct is only covered by 1 bid layer. Now as i look at online plans it looks like it should be mounted to the main wing shear web and notched into the bulkhead. Am i correct on this?
|
|
|