QCSM4? Isn’t that just a standard oilite shoulder bushing? It’s a press fit into a 5/16” hole into a 1/8” thick 2024-T3 Aluminum part (CS-17) and supports the 3/16” (IIRC) QCSM3 headless AN-bolt. Should be a standard FF303-01 oilite bushing from ACS: https://www.aircraftspruce.com/pages/ha/bushings/flangedbushings.php

I hope I’m not wrong….

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Robert Schmid
Sent: Friday, October 21, 2022 12:39 PM
To: main@Q-List.groups.io
Subject: [Q-List] Q2 Elevator Bushing?

 

I posted about this before and Jim jumped to the rescue with a Q200 part but unfortunately it didn't fit.

Anyone has a spare bushing please for the middle elevator hinge on my Q2 GA wing? Or if you know the part number for McCarr?

Thanks Robert
--
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.

The bushings that came with the kit were plated steel with a straight knurled shoulder I believe.

Taz

On Oct 22, 2022, at 8:16 PM, Robert Schmid <robert@...> wrote:

Yes that's the number in the plan, need to measure it out but that looks like it would work from ACS, thanks for the link!!!

Robert Schmid +1 (408) 805-5450 | robert@... theschmids.org "Age is something that doesn't matter, unless you are a cheese." - Luis Bunuel.

On Sat, Oct 22, 2022 at 10:26 AM David J. Gall <David@...> wrote:

QCSM4? Isn’t that just a standard oilite shoulder bushing? It’s a press fit into a 5/16” hole into a 1/8” thick 2024-T3 Aluminum part (CS-17) and supports the 3/16” (IIRC) QCSM3 headless AN-bolt. Should be a standard FF303-01 oilite bushing from ACS: https://www.aircraftspruce.com/pages/ha/bushings/flangedbushings.php

I hope I’m not wrong….

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Robert Schmid
Sent: Friday, October 21, 2022 12:39 PM
To: main@Q-List.groups.io
Subject: [Q-List] Q2 Elevator Bushing?

 

I posted about this before and Jim jumped to the rescue with a Q200 part but unfortunately it didn't fit.

Anyone has a spare bushing please for the middle elevator hinge on my Q2 GA wing? Or if you know the part number for McCarr?

Thanks Robert
-- 
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.

-- 
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.