I finally got enough of the snow cleared to get the Q-200 to the runway. They tend to plow down the center of the taxiways, but my gear is wider than they typically plow. So between my shoveling and m

The following files have been uploaded to the Files area of the main@Q-List.groups.io group. /Mid-span_elevator_pivot_re-design/Redesigned Midspan elevator hinge -- Scheevel 2012-07-21.pdf By: Jay Sch

Found this on craigslist https://bend.craigslist.org/avo/d/bend-q2-project-90-comp/7425980729.html

Hi All, Do any of you own/rent hangars at USA airports that have Scheduled airlines? If so, I'd like to know how your airport handles TSA Badge requirements. KPIE started charging a $20 a year badge f

Q-pilots, I have a question about the ground angle of attack note in the Q2 appendix "plans changes.” The note calls for setting WL15 level, and measuring from the ground to the bottom of the tailwhee

I have been procrastinating, for no other reason than that’s what I do. FOD 22 will be at KDEH. 15,16,17,18 Sept 22. Where would we be without acronyms? Details for lodging etc to come later. Thought

There isn’t any!! 6°F. Windchill -6°. Doesn’t make any difference what the wind direction. Doesn’t look good for the next 15 days either. The good news? The hanger rent is due!!! All of you that are f

My first flight of 2022 occurred on 1-5-2022. On New Years day we were fogged in bad. Today didn't look too bad. All the local airports were VFR with light winds. Supposed to be in the 70F's. Looks pr

I built my Q-1 1881 had a heart attack could not fly ,after siting around As a hangar Queen I donated it to our local Air Cadet Squadron fo education purpose. …..Happy New Year TooAll

Q listers, I am relatively new to the Q list, but I have been building my Q2 for several months now. Im based out of San Jose, CA with kit #2436. The Revmaster 2100 I have for the plane came out of a

Please stop the donations. If you didn't make it, maybe next year. Happy New Year to all and thanks for participating. Sam

Typos corrected: I’ve always had a bit of a headache removing the axle when needing to remove the tire. In one of the pics below, the darker steel rod is what I use to slide in and tap out the axle (w

Hi Guys. It's time to pay Groups.IO for the Q-list server (Actually, I already paid it last November. This year's bill was $110 and I am accepting limited donations if you feel like helping out. PLEAS

This is the view from my hangar today. Blue skies, but I don’t think I will be flying my Quickie. Happy new year to you all. Cheers, Jay

Merry Christmas everyone!! 🎄 If you are looking for something to do today 😉 - here's a short video of some fog over the high desert!! https://youtu.be/41OOB31kNRY Get those airplanes out and do some f

A little Q history for ya'll. I don't remember the exact year but approximately twenty years ago Paul Fisher and I were messing with video cameras on our Q's. These were the latest and greatest "spy c

Does anyone have an 0200 vacuum pump cover they would part with? I'm finally getting rid of about 30 lbs. of vacuum stuff. Jim N46JP

Hi gang, I am about 80% moved out of my rental hangar but had a delay. I developed hangar rash on the right elevator of the Tri-Pacer. This gave me an opportunity to learn fabric covering. I flew from

I had a problem where my carb was fowling the plugs bad, to the point where the next start up failed the mag test. I pulled the carb apart and thoroughly cleaned the passes related to the idle mixture

This month, instead of a Q-Tour, let's have an Ask the Pilots Q&A session. This is a chance for newbies, builders and wanabes to ask the guys who are actually flying those burning questions you have.